[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Re: [Linux-cluster] cman and bond isssue



Luis Godoy Gonzalez wrote:
> Hello
> 
> I have a problem with the installation of the Cluster Suite. I've
> configured 2 nodes cluster, add some services to test de installation
> and this worked OK.
> 
> But when I configured "bond" for ethernet interfaces, the communication
> between the Cluster nodes doesn't work well. Although networking at IP
> level works fine, when I reboot one of the nodes the other one goes to
> kernel panic.
> 
> I've lost a lot of time debbuging this problem and I finally decide to
> replace one switch ( D-Link DGS-1016D Gigabit Switch ) putting another
> from other installation  ( D-Link  10/100 ) and the cluster Works Fine now.
> 
> But Now, I'm not sure if the problem is with the hardware switch (
> D-Link ) or with the software.
> Any ideas ?
> 
> I have  RHE4 U2 and Cluster Suite 4 U2 using HP DL380 and external RAID.
> 
> Some error messages are below
> 
> ---------------------------------------------------------
> # SM: 03000002 process_stop_request: uevent already set
> 
> SM:  Assertion failed on line 106 of file
> /usr/src/build/615121-i686/BUILD/cman-
> kernel-2.6.9-39/smp/src/sm_membership.c
> SM:  assertion:  "node"
> SM:  time = 256523
> nodeid=1
> 


This was fixed in U3

-- 

patrick


[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]