[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Re: [Linux-cluster] RHCS/RHEL3 power switches options

I'm using APC AP7901 power switches in two different REL3 clusters. If
you don't alter the default configuration beyond setting your own
password, I believe the provided fencing agent works quite well. If you
try to use a more restricted user, it may or may not work. (Probably
not, in my experience.) The problem is that the APC telnet menus change
depending on the privileges of the connected user, so a restricted user
on the switch will not get the menus that the fencing agent expects.

I am also using GFS on those clusters, so I set up the fencing in GFS,
and then used the gulm bridge fencing agent in RHCS, which causes it to
pass the fencing work off to GFS. I have no experience using cluster
suite without GFS, on either RHEL3 or RHEL4.

Hope that helps.

On Tue, 2006-03-14 at 17:14 -0300, Filipe Miranda wrote:
> Hello,
> I'm having a really hard time trying to figure out what power switches
> do work with RHCS/RHEL3.
> Did anyone implement RHCS/RHEL3 with power switches ? 
> What options do I have when using power switches with this solution?
> I appreciate any help
> Att.
> ---
> Filipe Miranda 
> --
> Linux-cluster mailing list
> Linux-cluster redhat com
> https://www.redhat.com/mailman/listinfo/linux-cluster
Andrew C. Dingman
Unix Administrator
Cook Incorporated
(812)339-2235 x2131
adingman cookgroup com

[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]