[Linux-cluster] device-mapper errors
isplist at logicore.net
isplist at logicore.net
Fri Nov 3 05:19:02 UTC 2006
Whew, I'm starting to wonder if this stuff is worth all of the headaches. The
learning curve on this stuff is unreal. It's coming together but the constant
new problems is wearing me down :).
Just installed device-mapper-multipath. Seemed fine when I installed it a
while ago but suddenly;
fence_tool: waiting for cluster quorum
Another problem above... When I start up the cluster, the first nods always
get's locked out and I need to do a cman_tool expected -e 1 in another window.
And the problem I'm posting about, as I start the cluster;
Found duplicate PV TB3VUn1m3CBOj8dRnRjAbRuD3ZIyBp7t: using /dev/sde1 not
/dev/sda1
Found duplicate PV uXjYfhj4NlvQphf1DIz28psAAkFmJRaM: using /dev/sdf1 not
/dev/sdb1
Found duplicate PV 3mlyNROBtWp4a3LXQEKBiCwk3pJear7u: using /dev/sdg1 not
/dev/sdc1
1 logical volume(s) in volume group "VolGroup01" now active
Error locking on node compdev.companions.com: Internal lvm error, check
syslog
1 logical volume(s) in volume group "VolGroup04" now active
Error locking on node compdev.companions.com: Internal lvm error, check
syslog
1 logical volume(s) in volume group "VolGroup03" now active
Error locking on node compdev.companions.com: Internal lvm error, check
syslog
1 logical volume(s) in volume group "VolGroup02" now active
# tail /var/log/messages
Nov 2 23:12:04 compdev clvmd: Cluster LVM daemon started - connected to CMAN
Nov 2 23:12:05 compdev lvm[3335]: Found duplicate PV
TB3VUn1m3CBOj8dRnRjAbRuD3ZIyBp7t: using /dev/sde1 not /dev/sda1
Nov 2 23:12:05 compdev lvm[3335]: Found duplicate PV
uXjYfhj4NlvQphf1DIz28psAAkFmJRaM: using /dev/sdf1 not /dev/sdb1
Nov 2 23:12:05 compdev lvm[3335]: Found duplicate PV
3mlyNROBtWp4a3LXQEKBiCwk3pJear7u: using /dev/sdg1 not /dev/sdc1
Nov 2 23:12:06 compdev kernel: device-mapper: dm-linear: Device lookup failed
Nov 2 23:12:06 compdev kernel: device-mapper: error adding target to table
Nov 2 23:12:06 compdev kernel: device-mapper: dm-linear: Device lookup failed
Nov 2 23:12:06 compdev kernel: device-mapper: error adding target to table
Nov 2 23:12:06 compdev kernel: device-mapper: dm-linear: Device lookup failed
Nov 2 23:12:06 compdev kernel: device-mapper: error adding target to table
Is this because I need to do some more configuring in the /etc/multipath.conf?
Here's the output of multipath -ll
mpath1 (220000080e512699a)
[size=1 GB][features="0"][hwhandler="0"]
\_ round-robin 0 [prio=1][active]
\_ 0:0:2:0 sde 8:64 [active][ready]
\_ round-robin 0 [prio=1][enabled]
\_ 0:0:2:1 sdf 8:80 [active][ready]
\_ round-robin 0 [prio=1][enabled]
\_ 0:0:2:2 sdg 8:96 [active][ready]
mpath0 (220000080e511feb0)
[size=1 GB][features="0"][hwhandler="0"]
\_ round-robin 0 [prio=1][active]
\_ 0:0:0:0 sda 8:0 [active][ready]
\_ round-robin 0 [prio=1][enabled]
\_ 0:0:0:1 sdb 8:16 [active][ready]
\_ round-robin 0 [prio=1][enabled]
\_ 0:0:0:2 sdc 8:32 [active][ready]
More information about the Linux-cluster
mailing list