[Linux-cluster] LVS, not so fun today...

[isplist at logicore.net]

> Try removing that interface then starting up pulse. The netmask and
> gateway looks really off compared to eth0. Pulse will add the
> interface and then write back with your ifconfig output.

Ok, stopped pulse;
Nothing to remove on interface, restart pulse;

# ifconfig
eth0      Link encap:Ethernet  HWaddr 00:20:94:10:44:A5
          inet addr:192.168.1.52  Bcast:192.168.1.255  Mask:255.255.255.0
          inet6 addr: fe80::220:94ff:fe10:44a5/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:218526 errors:0 dropped:0 overruns:0 frame:0
          TX packets:44604 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:14276764 (13.6 MiB)  TX bytes:4034081 (3.8 MiB)

eth0:1    Link encap:Ethernet  HWaddr 00:20:94:10:44:A5
          inet addr:192.168.1.150  Bcast:192.168.1.255  Mask:255.255.255.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1

lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:8 errors:0 dropped:0 overruns:0 frame:0
          TX packets:8 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:560 (560.0 b)  TX bytes:560 (560.0 b)

Pulse adds VIP to interface; 

# tail -f /var/log/messages

Nov  9 14:51:04 lb52 pulse[3487]: STARTING PULSE AS MASTER
Nov  9 14:51:04 lb52 pulse: pulse startup succeeded
Nov  9 14:51:22 lb52 pulse[3487]: partner dead: activating lvs
Nov  9 14:51:22 lb52 lvs[3494]: starting virtual service HTTP active: 80
Nov  9 14:51:22 lb52 nanny[3498]: starting LVS client monitor for 
192.168.1.150:80
Nov  9 14:51:22 lb52 lvs[3494]: create_monitor for HTTP/cweb92 running as pid 
3498
Nov  9 14:51:22 lb52 nanny[3499]: starting LVS client monitor for 
192.168.1.150:80
Nov  9 14:51:22 lb52 lvs[3494]: create_monitor for HTTP/cweb93 running as pid 
3499
Nov  9 14:51:22 lb52 nanny[3500]: starting LVS client monitor for 
192.168.1.150:80
Nov  9 14:51:22 lb52 lvs[3494]: create_monitor for HTTP/cweb94 running as pid 
3500
Nov  9 14:51:27 lb52 pulse[3501]: gratuitous lvs arps finished
Nov  9 14:51:28 lb52 nanny[3498]: READ to 192.168.1.92:80 timed out
Nov  9 14:51:28 lb52 nanny[3499]: READ to 192.168.1.93:80 timed out
Nov  9 14:51:28 lb52 nanny[3500]: READ to 192.168.1.94:80 timed out