[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Re: [Linux-cluster] cman & qdiskd



qdisk is running:
[root n1 ~]# service qdiskd status
qdiskd (pid 1199) is running...
[root n2 ~]# service qdiskd status
qdiskd (pid 873) is running...

/tmp/qdisk-status:
[root n1 ~]# cat /tmp/qdisk-status
Node ID: 1
Score (current / min req. / max allowed): 3 / 2 / 3
Current state: Master
Current disk state: None
Visible Set: { 1 2 }
Master Node ID: 1
Quorate Set: { 1 2 }


Both nodes see /dev/etherd/e0.0 and can access it (tcpdump shows both
accessing it for timestamps I suppose)
/proc/cluster/nodes shows the same as "cman_tool nodes":
[root n1 ~]# cman_tool nodes
Node  Votes Exp Sts  Name
   1    1    2   M   n1
   2    1    2   M   n2

Everything looks OK, it's just not working.

cluster.conf:
<?xml version="1.0"?>
<cluster config_version="9" name="alpha_cluster">
        <fence_daemon post_fail_delay="0" post_join_delay="3"/>
        <clusternodes>
                <clusternode name="n1" votes="1" nodeid="1">
                        <fence>
                                <method name="1">
                                        <device name="man_fence"
nodename="n1"/>
                                </method>
                        </fence>
                </clusternode>
                <clusternode name="n2" votes="1" nodeid="2">
                        <fence>
                                <method name="1">
                                        <device name="man_fence"
nodename="n2"/>
                                </method>
                        </fence>
                </clusternode>
        </clusternodes>
        <cman/>
        <fencedevices>
                <fencedevice agent="fence_manual" name="man_fence"/>
        </fencedevices>
        <rm log_level="7">
                <failoverdomains/>
                <resources>
                        <ip address="192.168.22.250" monitor_link="1"/>
                        <script file="/etc/init.d/httpd" name="httpd"/>
                </resources>
                <service autostart="1" name="apache" recovery="relocate">
                        <ip ref="192.168.22.250"/>
                        <script ref="httpd"/>
                </service>
        </rm>
        <quorumd interval="1" tko="5" votes="3" log_level="7"
device="/dev/etherd/e0.0" status_file="/tmp/qdisk-status">
                <heuristic program="ping 192.168.22.1 -c1 -t1" score="1"
interval="2"/>
                <heuristic program="ping 192.168.22.60 -c1 -t1"
score="1" interval="2"/>
                <heuristic program="ping 192.168.22.100 -c1 -t1"
score="1" interval="2"/>
        </quorumd>
</cluster>

Katriel

Josef Whiter wrote:
> What does you're cluster.conf look like?  What about /proc/cluster/nodes?  Are
> you sure qdiskd is starting?  Your quorum stuff looks fine.  Do both nodes see
> /dev/etherd/e0.0 as the same disk?
> 
> Josef
> 
> On Tue, Oct 17, 2006 at 08:11:42PM +0200, Katriel Traum wrote:
> Hello.
> 
> I've seen this subject on the list, but no real solutions.
> I'm using Cluster 4 update 4, with qdiskd and a shared disk.
> I've understood from the documentation and list that a "cman_tool
> status" should reflect the number of votes the quorum daemon holds.
> 
> My setup is pretty straight forward, 2-node cluster, shared storage (AoE
> for testing).
> qdiskd configuration:
> <quorumd interval="1" tko="5" votes="3" log_level="7" device="/dev/ether
> d/e0.0" status_file="/tmp/qdisk-status">
>                 <heuristic program="ping 192.168.22.1 -c1 -t1" score="1"
> interval="2"/>
>                 <heuristic program="ping 192.168.22.60 -c1 -t1"
> score="1" interval="2"/>
>                 <heuristic program="ping 192.168.22.100 -c1 -t1"
> score="1" interval="2"/>
>         </quorumd>
> 
> cman_tool status shows:
> [root n1 ~]# cman_tool status
> Protocol version: 5.0.1
> Config version: 8
> Cluster name: alpha_cluster
> Cluster ID: 50356
> Cluster Member: Yes
> Membership state: Cluster-Member
> Nodes: 2
> Expected_votes: 2
> Total_votes: 2
> Quorum: 2
> Active subsystems: 4
> Node name: n1
> Node addresses: 192.168.22.201
> 
> qdiskd is running, scoring a perfect 3 out of 3, but no votes...
> When disconnecting one of the nodes, the other will loose quorum. Am I
> missing something?
> 
> Any insight appreciated.
>>
--
Linux-cluster mailing list
Linux-cluster redhat com
https://www.redhat.com/mailman/listinfo/linux-cluster

> --
> Linux-cluster mailing list
> Linux-cluster redhat com
> https://www.redhat.com/mailman/listinfo/linux-cluster

-- 
Katriel Traum, PenguinIT
RHCE, CLP
Mobile: 054-6789953


[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]