[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Re: [Linux-cluster] Fencing Hardware



Right, yes, I do have such software but there is no SDK or anything that I 
know of that would allow external control. And, the software would not lend 
itself to external controls for fencing, that I know of.

Anyone using Cubix Blade servers?

Mike


On Tue, 24 Oct 2006 15:25:36 -0400, Greg Forte wrote:
> check your documentation, or call your vendor.  The power should be
> 
> configurable at the enclosure level, not the individual blades.  There
> should be some sort of interface that you can log into and say "down the
> power on the blade in slot X".  Though this may be an add-on that you
> haven't purchased.
> 
> -g
> 
> isplist logicore net wrote:
>> Each blade has one slot for an add on card which I've taken up for Fibre
>> Channel cards. In my case at least, there's no room for anything else and
>> I'm
>> not sure there are any packages that handle external power controls for my
>> machines.
>> 
>> Mike
>> 
>> 
>> On Tue, 24 Oct 2006 15:20:21 -0400, Neil Watson wrote:
>>> Don't most blade centres come with remote management controllers?  For
>>> 
>>> example HP's iLO cards.
>> 
>> 
>> --
>> Linux-cluster mailing list
>> Linux-cluster redhat com
>> https://www.redhat.com/mailman/listinfo/linux-cluster





[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]