[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

[Linux-cluster] Clurmtabd needs to be run manually?



When I start clumanager I notice that clumrmtabd does not start up. The man
page says the service manager daemon will automatically start is for each mount
point. But this does not seem to happen.

I can start it manually. Does anyone know if this is the expected behavior? Is it accepatable to manually start it? Below is my cluster.xml file.


<?xml version="1.0"?>
<cluconfig version="3.0">
  <clumembd broadcast="no" interval="750000" loglevel="5" multicast="yes" multicast_ipaddress="225.0.0.11" thread="yes" tko_count="20"/>
  <cluquorumd loglevel="5" pinginterval="" tiebreaker_ip=""/>
  <clurmtabd loglevel="5" pollinterval="4"/>
  <clusvcmgrd loglevel="5"/>
  <clulockd loglevel="5"/>
  <cluster config_viewnumber="1" key="d05ba7b1a725ad9e94017e45a3eda03e" name="Service Nodes"/>
  <sharedstate driver="libsharedraw.so" rawprimary="/dev/raw/raw1" rawshadow="/dev/raw/raw2" type="raw"/>
  <members>
    <member id="0" name="10.20.70.100" watchdog="yes">
      <powercontroller id="0" ipaddress="10.20.70.101" password="calvin" port="80" type="dell_rac" user="root"/>
    </member>
    <member id="1" name="10.20.70.102" watchdog="yes">
      <powercontroller id="0" ipaddress="10.20.70.50" password="calvin" port="80" type="dell_rac" user="root"/>
    </member>
  </members>
  <services>
    <service checkinterval="5" failoverdomain="Service Nodes" id="0" name="service-core" userscript="/etc/init.d/service-core">
      <service_ipaddresses>
        <service_ipaddress broadcast="" id="0" ipaddress="10.20.70.104" netmask="255.255.255.0"/>
      </service_ipaddresses>
      <device id="0" name="LABEL=/service4" sharename="">
        <mount forceunmount="yes" fstype="ext3" mountpoint="/service" options=""/>
      </device>
    </service>
  </services>
  <failoverdomains>
    <failoverdomain id="0" name="Service Nodes" ordered="no" restricted="yes">
      <failoverdomainnode id="0" name="10.20.70.100"/>
      <failoverdomainnode id="1" name="10.20.70.102"/>
    </failoverdomain>
  </failoverdomains>
</cluconfig>


[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]