[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Re: [Linux-cluster] Multicast



run cman_tool nodes on all nodes
send /var/log/messages

for all nodes in the cluster

Identify your network topology (Are you using a Cisco switch?  Are you
using a PIX device in a 65xx Catalyst?)  Or some other forms of switche.

Regards
-steve

On Mon, 2007-08-20 at 12:13 -0400, Patricio A. Bruna wrote:
> Hi,
> It was the configuration of broadcast in RHEL 5, now i can ping the multicast IP.
> 
> But my real problem is still there, when i open system-config-cluster it says this member is not part of a cluster.
> 
> ----- "Steven Dake" <sdake redhat com> escribió:
> > On Fri, 2007-08-17 at 12:41 -0400, Patricio A. Bruna wrote:
> > > Hi,
> > > Does cluster suite use Multicast in Red Hat 5?
> > > If is so, how can i test my Switchs allow multicast traffic?
> > > 
> > Depends on your switch model, whether it is uplinked, and whether it
> > is
> > layer 2 or connected to a layer 3 device.  A description of your
> > network
> > topology would be helpful.
> > 
> > Regards
> > -steve
> > 
> > > Thanks
> > > 
> > > --
> > > Linux-cluster mailing list
> > > Linux-cluster redhat com
> > > https://www.redhat.com/mailman/listinfo/linux-cluster
> > 
> > --
> > Linux-cluster mailing list
> > Linux-cluster redhat com
> > https://www.redhat.com/mailman/listinfo/linux-cluster
> 


[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]