[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

[Linux-cluster] Problem with Fence



Hello, the first thing, sorry for my English i'am Spanish.
I am trying to mount in an environment of tests a system of cluster with two PC.
None of the pc have devices fence installed.
Every PC has two cards of network ethernet, one of which this one in a private
network 10.0.0. X, for test to another node.
Another card has an ip 192.168.X.X, of my net and a virtual ip 192.168. X.X1
to the access to the services of the cluster.

eth0------>192.168.56.15 (IP computer)
eth0:1---->192.168.56.24 (IP Virtual)
eth1------>10.0.0.1 (IP fence)

eth0------>192.168.56.16 (IP computer)
eth0:1---->192.168.56.24 (IP Virtual)
eth1------>10.0.0.2 (IP fence)

The interface eth0:1 (192.168.56.24) is up when cluster is up while in the other
node, inteface and cluster service are down


Is possible configure the cluster this way?
That type of device fence must i to use?

I probe to configure cluster (eth0:1) with WTI, APC... fence devices, and i have same ressults.

/etc/init.d/ccsd start OK
/etc/init.d/fenced start FAIL
..........

Thank you very much and regards.
[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]