[Linux-cluster] RH Cluster issue

[Harun]

Yes there are some updates. But I want to resolve the issue with out any up
gradations. Do you think that updating can resolve the issue?

Cluster.xml looks like this.

  <?xml version="1.0" ?> 
- <cluconfig version="3.0">
  <clumembd broadcast="no" interval="1000000" loglevel="5" multicast="yes"
multicast_ipaddress="225.0.0.11" thread="yes" tko_count="25" /> 
  <cluquorumd loglevel="5" pinginterval="2" tiebreaker_ip="" /> 
  <clurmtabd loglevel="5" pollinterval="4" /> 
  <clusvcmgrd loglevel="5" /> 
  <clulockd loglevel="5" /> 
  <cluster config_viewnumber="74" key="e307059f0bed8596868c4ab99818dc5d"
name="Oracle_cluster" /> 
  <sharedstate driver="libsharedraw.so" rawprimary="/dev/raw/raw1"
rawshadow="/dev/raw/raw2" type="raw" /> 
- <members>
  <member id="0" name="DB-Primary" watchdog="yes" /> 
  <member id="1" name="DB-Secondary" watchdog="yes" /> 
  </members>
- <services>
- <service checkinterval="0" failoverdomain="None" id="0" maxfalsestarts="3"
maxrestarts="0" name="AOFSPROD" userscript="">
- <service_ipaddresses>
  <service_ipaddress broadcast="None" id="0" ipaddress="192.168.0.7"
monitor_link="0" netmask="255.255.255.0" /> 
  </service_ipaddresses>
- <device id="0" name="/dev/sdb3" sharename="">
  <mount forceunmount="yes" fstype="ext3" mountpoint="/data1" options="" /> 
  </device>
- <device id="1" name="/dev/sdb4" sharename="">
  <mount forceunmount="yes" fstype="ext3" mountpoint="/data2" options="" /> 
  </device>
- <device id="2" name="/dev/sdc1" sharename="">
  <mount forceunmount="yes" fstype="ext3" mountpoint="/backup" options="" />

  </device>
- <device id="3" name="/dev/sdd1" sharename="">
  <mount forceunmount="yes" fstype="ext3" mountpoint="/archive" options=""
/> 
  </device>
  </service>
  </services>
  <failoverdomains /> 
  </cluconfig>


-----Original Message-----
From: linux-cluster-bounces at redhat.com
[mailto:linux-cluster-bounces at redhat.com] On Behalf Of Lon Hohberger
Sent: Monday, December 17, 2007 7:35 PM
To: linux clustering
Subject: Re: [Linux-cluster] RH Cluster issue

On Mon, 2007-12-17 at 09:04 +0400, Harun wrote:
> Issue: When the public network cable is removed from any for the node
> both nodes restarts itself. 

> I want to test a live setup... a Linux Cluster with 2 nodes, in Linux
> Advanced Server (Linux DB-Primary 2.4.21-37.ELsmp #1 SMP Wed Sep 7
> 13:28:55 EDT 2005 i686 i686 i386 GNU/Linux )

There have been a few updates since 2.4.21-37, I think.


> But only issue here is that if I pull out any of the network cable
> in the public interface, both server restart together. I am just
> confused with what configuration files to check or how get started

That's strange.  I assume you're running clumanager-1.2.35.2, right?

For a tiebreaker, you should use the nearest upstream router.
Alternatively, with clumanager 1.2.x you can also use no IP address
which should be a 'disk' tiebreaker.

What does cluster.xml look like?

-- Lon


--
Linux-cluster mailing list
Linux-cluster at redhat.com
https://www.redhat.com/mailman/listinfo/linux-cluster


<<<<   Disclaimer Message  >>>>
"This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you are not the named addressee, please notify the sender immediately after deleting this e-mail from your system and do not disseminate, distribute or copy this e-mail. The sender does not accept liability for any errors or omissions in the contents of this message, which arise as a result of erroneous e-mail transmission."
[Mohsin Haider Darwish LLC & Group Companies, PO.Box 880, Ruwi-112, Oman]