[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Re: [Linux-cluster] Regd: Ethernet Channel Bonding issue in Cluster



Hi!

Sorry I couldn't get what's the issue,

Isn't the bonding working?

BR

On Dec 26, 2007 4:25 AM, Balaji <balajisundar midascomm com> wrote:
> Dear All,
> I have configured Cluster Suite with 2 servers
> Server 1 : 192.168.13.110 IP Address and hostname is primary
> Server 2 : 192.168.13.179 IP Address and hostname is secondary
> Floating : 192.168.13.83 IP Address (Assumed by currently active server)
>
> I have configured Ethernet Channel Bonding in Each Cluster Nodes and
> Channel Bonding Configuration Details are
> 1) Created bonding devices in "/etc/modprobe.conf" file
>     alias bond0 bonding
>     options bonding miimon=100 mode=1
> 2) Edit the "/etc/sysconfig/network-scripts/ifcfg-eth0 and ifcfg-eth1"
> configuration
>     DEVICE=eth0
>     USERCTL= no
>     ONBOOT=yes
>     MASTER=bond0
>     SLAVE=yes
>     BOOTPROTO=none
>
>     DEVICE=eth1
>     USERCTL= no
>     ONBOOT=yes
>     MASTER=bond0
>     SLAVE=yes
>     BOOTPROTO=none
> 3) Created a network script for the bonding device is
> "/etc/sysconfig/network-scripts/ifcfg-bond0"
>     DEVICE=bond0
>     USERCTL=no
>     ONBOOT=yes
>     NETMASK=255.255.255.0
>     GATEWAY=192.168.13.1
>     IPADDR=192.168.13.110
> 4) Reboot the system for the changes to take effect.
>
> After i am rebooted both the server then cluster node becomes simplex
> and Services are started on both the nodes
> The cluster ouput in primary node
>
> Member Status: Quorate
>
>   Member Name                              Status
>   ----------- -------                              ---------
>   primary                                         Online, Local, rgmanager
>   secondary                                      Offline
>
>   Service Name         Owner (Last)                   State
>   --------- --------         -----------------                   --------
>   Service                      primary                        started
>
> The cluster ouput in secondary node
>
> Member Status: Quorate
>
>   Member Name                              Status
>   ----------- -------                              ---------
>   primary                                         Offline
>   secondary                                      Online, Local, rgmanager
>
>   Service Name         Owner (Last)                   State
>   --------- --------         -----------------                   --------
>   Service                      secondary                     started
>
> Before Ethernet Channel Bonding cluster services are active in one node
> and other nodes acts as passive node.
> But after Ethernet Channel Bonding cluster services are active on both
> the nodes
> I need to solve the following issue and services are run only active node.
>
> Can some one throw light on this peculiar problem
>
> Regards
> -S.Balaji
>
> --
> Linux-cluster mailing list
> Linux-cluster redhat com
> https://www.redhat.com/mailman/listinfo/linux-cluster
>



-- 
Fabian


[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]