[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Re: [Linux-cluster] Piranha not bring up all interfaces

On 1/25/07, Lon Hohberger <lhh redhat com> wrote:
On Thu, 2007-01-25 at 09:55 -0500, David Brieck Jr. wrote:
> I'm having a problem with our LVS setup using piranha and I'm hoping
> this would be the right place to ask about it. What's happening is
> that whenever we start or restart pulse, it brings up all the virtual
> servers but for some reason it will not bring up all of the interfaces
> for the VIP addresses.
> If I just keep restarting pulse it will sometimes bring up different
> interfaces and sometimes bring up 6/10 or 8/10 or 9/10 of the
> interfaces it is supposed to bring up. However if I manually go back
> and issue the ifconfig command to bring up the missing interfaces
> everything works just fine.
> There are no errors logged and starting pulse from the command line
> with 'pulse -n -v' doesn't indicate anything is wrong either. We have
> 10 active virtual servers and each has 3 real servers behind it.
> Any ideas?

Happen to be running bonding on e1000?

-- Lon

The system has 4 e1000 ports, 2 are bonded for cluster traffic, one is
an internet interface and the other is for LAN traffic.

The interfaces that aren't coming up are on eth3, not bond0.

I take it this is a known bug?

The debug output from the command line contains something like this:

/sbin/ifconfig eth2:1 netmask up
/sbin/ifconfig eth3:1 xx.xx.5.68 netmask up
/sbin/ifconfig eth3:2 xx.xx.5.69 netmask up
/sbin/ifconfig eth3:3 xx.xx.5.70 netmask up
/sbin/ifconfig eth3:4 xx.xx.5.71 netmask up
/sbin/ifconfig eth3:5 xx.xx.5.77 netmask up
/sbin/ifconfig eth3:6 xx.xx.5.78 netmask up
/sbin/ifconfig eth3:7 xx.xx.5.79 netmask up
/sbin/ifconfig eth3:8 xx.xx.5.81 netmask up
/sbin/ifconfig eth3:9 xx.xx.5.82 netmask up
/sbin/ifconfig eth3:11 xx.xx.5.84 netmask up

[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]