[Linux-cluster] Sun ILOM

Brieseneck, Arne, VF-Group Arne.Brieseneck at vodafone.com
Thu Nov 22 08:22:07 UTC 2007


Hi Fabian,

I have created a new account on each ILOM board. This account is
mentioned in the cluster.conf section.


Cheers,
Arne 

-----Original Message-----
From: linux-cluster-bounces at redhat.com
[mailto:linux-cluster-bounces at redhat.com] On Behalf Of Fabian Salamanca
Dominguez
Sent: Mittwoch, 21. November 2007 21:48
To: linux clustering
Subject: Re: [Linux-cluster] Sun ILOM

Thanks all for the prompt responses!

Arne,

I have a doubt, which type of authentication do you use for ILOM's IPMI
configuration in the fence devices section?

thanks!!!

On Nov 13, 2007 9:52 AM, Brieseneck, Arne, VF-Group
<Arne.Brieseneck at vodafone.com> wrote:
>
>
> I have a 40 node SUN X4100 cluster with fence_ipmilan running.
> If you have any questions let me know...
>
>
>  ________________________________
>  From: linux-cluster-bounces at redhat.com 
> [mailto:linux-cluster-bounces at redhat.com] On Behalf Of Fair, Brian
> Sent: Dienstag, 13. November 2007 16:33
> To: linux clustering
> Subject: RE: [Linux-cluster] Sun ILOM
>
>
>
>
> I'm sure you know this, but Sun has shipped several different out of 
> band management solutions over the years. They have different 
> software, commands, and features.
>
> Some (all maybe, couldn't say) of the newer stuff is IPMI... 
> coolthreads, the newer x86 based boxes certainly, etc. There are a few

> different types it could be if its older equipment.
>
> Just something to keep in mind if you hear that IPMI is working for a 
> Sun box.
>
> Curious -- what kind of hardware are you building out your cluster on?
>
> -Brian
>
>  ________________________________
>  From: linux-cluster-bounces at redhat.com 
> [mailto:linux-cluster-bounces at redhat.com] On Behalf Of Dave Costakos
> Sent: Monday, November 12, 2007 2:21 PM
> To: linux clustering
> Subject: Re: [Linux-cluster] Sun ILOM
>
>
> I should say that I am successfully using fence_ipmi in a 3-node Sun 
> 4600 cluster -- though I obviously had to connect to the iLOM via the 
> network interface rather than the serial interface (which is our
normal procedure).
>
> -Dave.
>
>
> On Nov 12, 2007 9:02 AM, Kevin Anderson <kanderso at redhat.com> wrote:
>
> >
> >
> > On Mon, 2007-11-12 at 10:48 -0600, Fabian Salamanca Dominguez wrote:
> >
> > Hi!
> >
> > Are Sun's LOM and ILOM cards supported as fencing devices for Red 
> > Hat Cluster Suite?
> >
> >
> > No one has implemented a fencing script for those devices as of yet.

> > I
> believe people have had success using fence_ipmi with the Sun 
> hardware, so you might want to try that.  Alternatively, if you have 
> access to the hardware, take a look at implementing the fence agent.
> >
> > Kevin
> > --
> > Linux-cluster mailing list
> > Linux-cluster at redhat.com
> > https://www.redhat.com/mailman/listinfo/linux-cluster
> >
>
>
>
> --
> Dave Costakos
> mailto:david.costakos at gmail.com
> --
> Linux-cluster mailing list
> Linux-cluster at redhat.com
> https://www.redhat.com/mailman/listinfo/linux-cluster
>



--
Fabian

--
Linux-cluster mailing list
Linux-cluster at redhat.com
https://www.redhat.com/mailman/listinfo/linux-cluster




More information about the Linux-cluster mailing list