[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Re: [Linux-cluster] problems with iscsi storage and boot order



I have tried both suggestions.  I added the line:
node.session.initial_login_retry_max = 8
I even made the value as high as 20 with no change during boot up.  Then I added NETWORKDELAY=20 to /etc/sysconfig/network and I still see:
iscsiadm: Could not login session (err 4)
iscsiadm: initiator reported error (4 - encountered connection failure)

when I boot the machine.  After the machine as booted, I restart iscsi, clvmd, and gfs and everything works.  Sometimes I hate computers.

Thanks,
Randy

Bryn M. Reeves wrote:
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

gordan bobich net wrote:
  
On Mon, 22 Oct 2007, Randy Brown wrote:

    
Thanks, I'll try upping the retries.  I am assuming this is the same
thing as increasing the time value here:
      
No. Timeouts and retries are separate settings. The problem is usually
that the iSCSI subsystems tries to access the SAN before the network has
fully come up.

    

You can also tweak the network delay setting in /etc/sysconfig/network.
Set the variable NETWORKDELAY to a value (in seconds) and the network
scripts will sleep for this period of time after bringing all interfaces
up. This should allow time for your network to be fully up before the
iscsi service starts.

Regards,
Bryn.

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.7 (GNU/Linux)
Comment: Using GnuPG with Fedora - http://enigmail.mozdev.org

iD8DBQFHHatA6YSQoMYUY94RAiGAAJ41fsuuLLvypgti/C+Ik07RCBUkrgCfUL9W
tYdoAqbjAdoRr02KJKssdJQ=
=nciQ
-----END PGP SIGNATURE-----

--
Linux-cluster mailing list
Linux-cluster redhat com
https://www.redhat.com/mailman/listinfo/linux-cluster
  

[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]