[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Re: [Linux-cluster] manual fencing -- issues

My understanding is that fence device selection is done by ordering, but I could be wrong.


On Tue, 29 Jan 2008, Terry wrote:


I know that manual fencing is not supported.  However, I don't have
anything else with the hardware I am testing at this time.  When (if)
we go live with this, I'll be using Dell DRACs to handle the fencing.
At any rate, I am trying manual fencing to test proof of concept.  I
am using RHEL5.1 with Conga to configure it.  My config is at the
bottom of this email.   Shouldn't there be a nodename paramater in
this block:
                               <method name="1">
                                       <device name="fence00"

??  If so, why isn't Conga configuring this correctly?  If not, why am
I getting this error during a crash of the node with the service on
Jan 29 10:56:08 dss00 fenced[2965]: agent "fence_manual" reports:
failed: fence_manual no node name
Jan 29 10:56:08 dss00 fenced[2965]: fence "dss01.foobar.local" failed

Thanks for any ideas.

<?xml version="1.0"?>
<cluster alias="cluster00" config_version="5" name="cluster00">
       <fence_daemon clean_start="0" post_fail_delay="0" post_join_delay="3"/>
               <clusternode name="dss01.foobar.local" nodeid="1" votes="1">
                               <method name="1">
                                       <device name="fence01"/>
               <clusternode name="dss00.foobar.local" nodeid="2" votes="1">
                               <method name="1">
                                       <device name="fence00"/>
       <cman expected_votes="1" two_node="1"/>
               <fencedevice agent="fence_manual" name="fence00"/>
               <fencedevice agent="fence_manual" name="fence01"/>
                       <failoverdomain name="failover00" ordered="0"
name="dss01.foobar.local" priority="1"/>
name="dss00.foobar.local" priority="1"/>
               <service autostart="1" domain="failover00"
exclusive="0" name="nfs" recovery="relocate">
                       <ip address="" monitor_link="1"/>
                       <fs device="/dev/sdb1" force_fsck="0"
force_unmount="1" fsid="8849" fstype="ext3" mountpoint="/data00"
name="data00" self_fence="1"/>
                       <nfsexport name="data00_nfs"/>

Linux-cluster mailing list
Linux-cluster redhat com

[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]