[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Re: [Linux-cluster] DLM Problem



> That means that something else is using port 21064 - the TCP port that
> the DLM uses. If the DLM can't bind to its port then it cannot start.

What's weird is that I didn't change anything, just the storage, then needing 
to get the cluster quorum so that I could set up gfs. 

> Use netstat -tap or lsof to find out what is using that port. If you
> can't stop that particular application that is using it, then you'll

#lsof -i | grep 21064
Reveals nothing.

# netstat -anp | grep 21064
Seems to show port 21064 being available.
 
tcp	0	0 192.168.1.58:21064      0.0.0.0:*                   LISTEN      -
tcp	0	0 192.168.1.58:6809        192.168.1.62:21064  ESTABLISHED -
tcp	0	0 192.168.1.58:21064      192.168.1.63:32780  ESTABLISHED -
tcp    0   0 192.168.1.58:21064	192.168.1.92:6809     ESTABLISHED -
tcp	0	0 192.168.1.58:21064		192.168.1.62:6809     ESTABLISHED -
tcp	0	0 192.168.1.58:21064      192.168.1.40:6809     ESTABLISHED -

# nmap -sT -O localhost

PORT      STATE SERVICE
22/tcp    open  ssh
25/tcp    open  smtp
80/tcp    open  http
111/tcp   open  rpcbind
139/tcp   open  netbios-ssn
443/tcp   open  https
445/tcp   open  microsoft-ds
795/tcp   open  unknown
10000/tcp open  snet-sensor-mgmt

Is this a bug or something? I'm just not finding all that much on the net. I'm 
looking for dlm_lock port 21064 issues, etc. 

Mike




[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]