[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Re: [Linux-cluster] Fencing using iDRAC/ Dell M600



Are you sure you are using an actual M600 blade chassis? On the ones
I've got, they speak a different language after the telnet from other
DRAC cards, hence the problem.

2008/7/29 Brandon Young <bkyoung gmail com>:
> I use this method of fencing on my cluster.  With RHCS, there is a supplied
> fencing script for DRAC cards.  The trick is you have to enable telnet on
> the DRAC cards for the supplied script to work (you can either do this
> through the web interface, or install the Dell Management Software and issue
> some command I don't remember right now).  Since the DRAC cards are (should
> be) on a private network, this is not too bad of a problem.
>
> On Tue, Jul 29, 2008 at 10:42 AM, David J Craigon <david craigon co uk>
> wrote:
>>
>> Hello,
>>
>> I've been given the job of getting a box of Dell blades (an M600)
>> fencing correctly using the onboard DRACs (which Dell call an iDRAC).
>> As far as I can tell, no one has done this- none of the existing
>> fence_ scripts appear to do the trick. The command line interface is
>> very different from a traditional Dell DRAC.
>>
>> Has anyone already done this? I'm going to write a fence script to do
>> this, but I thought I'd check before I wasted my time.
>>
>> Thanks everyone,
>>
>> David
>>
>> --
>> Linux-cluster mailing list
>> Linux-cluster redhat com
>> https://www.redhat.com/mailman/listinfo/linux-cluster
>
>
> --
> Linux-cluster mailing list
> Linux-cluster redhat com
> https://www.redhat.com/mailman/listinfo/linux-cluster
>


[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]