[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

[Linux-cluster] Info & documentation on configuring Power Fencing using IBM RSA II (x3850/3950 M2 servers )



Hi,
 
We've been googling to look for step by step guide on how to configure
IBM RSA II for power fencing in an RHES 5.1  environment.
 
Is it just as simple as this one page instruction below :
http://www.redhat.com/docs/manuals/csgfs/browse/rh-cs-en/s1-config-fence-devices.html
 
 
Some questions :
 
a)how do we get the "Add a New Fence Device" screen?  Is it somewhere on the
   Redhat Gnome desktop that I can click to bring it up?
 
b)the factory default IP addr of the RSA II  LAN port is 192.168.70.125/24.
   What's the IP addr I can input in the above "Add New Fence Device"
   screen - must it be 192.168.70.x  (within same subnet as 192.168.70.125)?
 
c)do we repeat the same step("Add New Fence Device") for every RHES
   server in the cluster & is the same IP address/login id being input for
   each of the servers in the cluster?
 
The link below only gives a little concept, not actual configuration guide :
http://www.centos.org/docs/4/4.5/SAC_Cluster_Suite_Overview/s2-fencing-overview-CSO.html

 
Any other links/information is much appreciated.
 
Thanks
 
 

[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]