[Linux-cluster] RE: Linux-cluster Digest, Vol 50, Issue 32
Kumar, T Santhosh (TCS)
T.Kumar at alcoa.com
Wed Jun 25 13:51:07 UTC 2008
If this is thr error, then start the lvm by "/usr/sbin/clvmd" which
will start clvmd while cluster VG/resources are online.
[root at yoda2 ~]# /etc/init.d/clvmd status
clvmd dead but subsys locked
active volumes: LV06 LV_nex2
-----Original Message-----
From: linux-cluster-bounces at redhat.com
[mailto:linux-cluster-bounces at redhat.com] On Behalf Of
linux-cluster-request at redhat.com
Sent: Wednesday, June 25, 2008 5:58 AM
To: linux-cluster at redhat.com
Subject: Linux-cluster Digest, Vol 50, Issue 32
Send Linux-cluster mailing list submissions to
linux-cluster at redhat.com
To subscribe or unsubscribe via the World Wide Web, visit
https://www.redhat.com/mailman/listinfo/linux-cluster
or, via email, send a message with subject or body 'help' to
linux-cluster-request at redhat.com
You can reach the person managing the list at
linux-cluster-owner at redhat.com
When replying, please edit your Subject line so it is more specific
than "Re: Contents of Linux-cluster digest..."
Today's Topics:
1. Re: can't communicate with fenced -1 (GS R)
2. Re: Info & documentation on configuring Power Fencing using
IBM RSA II (x3850/3950 M2 servers ) (GS R)
3. Re: can't communicate with fenced -1 (Gian Paolo Buono)
4. Re: can't communicate with fenced -1 (Gian Paolo Buono)
5. Re: can't communicate with fenced -1 (GS R)
----------------------------------------------------------------------
Message: 1
Date: Wed, 25 Jun 2008 14:03:51 +0530
From: "GS R" <gsrlinux at gmail.com>
Subject: Re: [Linux-cluster] can't communicate with fenced -1
To: "linux clustering" <linux-cluster at redhat.com>
Message-ID:
<d765e01f0806250133t521f1a99y2852225d4e46a891 at mail.gmail.com>
Content-Type: text/plain; charset="iso-8859-1"
>
>
>
>
> 2008/6/25 GS R <gsrlinux at gmail.com>:
>
>>
>>
>> On 6/24/08, Gian Paolo Buono <gpbuono at gmail.com> wrote:
>>
>>> Hi,
>>>
>>> We have two RHEL5.1 boxes installed sharing a
>>> single iscsi emc2 SAN, whitout fence devices. System is configured
>>>
>>>
>>> as a high-availability system of xen guest.
>>>
>>> One of the most repeating problems are fence_tool related.
>>>
>>> # service cman start
>>> Starting cluster:
>>> Loading modules... done
>>> Mounting configfs... done
>>> Starting ccsd... done
>>> Starting cman... done
>>> Starting daemons... done
>>> Starting fencing... fence_tool: can't communicate with fenced -1
>>>
>>>
>>>
>>> # fenced -D
>>> 1204556546 cman_init error 0 111
>>>
>>> # clustat
>>> CMAN is not running.
>>>
>>> # cman_tool join
>>>
>>> # clustat
>>> msg_open: Connection refused
>>>
>>> Member Status: Quorate
>>> Member Name ID Status
>>>
>>> ------ ---- ---- ------
>>> yoda1 1 Online, Local
>>> yoda2 2 Offline
>>>
>>> Sometimes this problem gets solved if the two machines are rebooted
at
>>>
>>>
>>>
>>> the same time. But in the current HA configuration, I cannot
guarantee
>>> two systems will be rebooted at the same time for every problem we
>>> face. This is my config file:
>>>
>>>
###################################cluster.conf#########################
###########
>>>
>>>
>>>
>>> <?xml version="1.0"?>
>>> <cluster alias="yoda-cl" config_version="2" name="yoda-cl">
>>> <fence_daemon clean_start="0" post_fail_delay="0"
post_join_delay="3"/>
>>>
>>>
>>>
>>> <clusternodes>
>>> <clusternode name="yoda2" nodeid="1" votes="1">
>>> <fence/>
>>> </clusternode>
>>> <clusternode name="yoda1" nodeid="2" votes="1">
>>>
>>>
>>>
>>> <fence/>
>>> </clusternode>
>>> </clusternodes>
>>> <cman expected_votes="1" two_node="1"/>
>>> <rm>
>>> <failoverdomains/>
>>>
>>>
>>>
>>> <resources/>
>>> </rm>
>>> <fencedevices/>
>>> </cluster>
>>>
###################################cluster.conf#########################
###########
>>> Regards.
>>>
>>> Hi
>>
>> I configured a two node cluster with no fence device on RHEL5.1.
>> The cluster started and stopped with no issues. The only difference
that I
>> see is that I have used FQDN in my cluster.conf
>>
>> i.e., <clusternode name="yoda2*.gsr.com*" nodeid="1" votes="1">
>>
>> Check your /etc/hosts if it has the FQDN in it.
>>
>> Thanks
>> Gowrishankar Rajaiyan
>>
>>
>>
>
On 6/25/08, Gian Paolo Buono <gpbuono at gmail.com> wrote:
>
> Hi,
> the problem of my cluster is that it start-up weel but after two days
the
> problem that I have described is running, and this problem gets solved
if
> the two machines are rebooted at the same time.
>
> Thanks
> Gian Paolo
Hi Gian
Could you please attach the logs.
Thanks
Gowrishankar Rajaiyan
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
https://www.redhat.com/archives/linux-cluster/attachments/20080625/805cd
bbe/attachment.html
------------------------------
Message: 2
Date: Wed, 25 Jun 2008 14:17:26 +0530
From: GS R <gsrlinux at gmail.com>
Subject: Re: [Linux-cluster] Info & documentation on configuring Power
Fencing using IBM RSA II (x3850/3950 M2 servers )
To: linux clustering <linux-cluster at redhat.com>
Message-ID: <4862061E.9040306 at gmail.com>
Content-Type: text/plain; charset="iso-8859-1"
sunhux G wrote:
> Hi,
>
> We've been googling to look for step by step guide on how to configure
> IBM RSA II for power fencing in an RHES 5.1 environment.
>
> Is it just as simple as this one page instruction below :
>
http://www.redhat.com/docs/manuals/csgfs/browse/rh-cs-en/s1-config-fence
-devices.html
>
>
> Some questions :
>
> a)how do we get the "Add a New Fence Device" screen? Is it
> somewhere on the
> Redhat Gnome desktop that I can click to bring it up?
No. It's not anywhere in RedHat Gnome. You will have to use Conga OR
system-config-cluster OR enter it manually.
>
> b)the factory default IP addr of the RSA II LAN port is
> 192.168.70.125/24 <http://192.168.70.125/24>.
> What's the IP addr I can input in the above "Add New Fence Device"
> screen - must it be 192.168.70.x (within same subnet as
> 192.168.70.125 <http://192.168.70.125>)?
It's the IP address assigned to the IPMI port and not the network.
>
> c)do we repeat the same step("Add New Fence Device") for every RHES
> server in the cluster & is the same IP address/login id being input
for
> each of the servers in the cluster?
New fence device is added only once. However, you need to assign this
fence device to all the nodes in your cluster.
>
> The link below only gives a little concept, not actual configuration
> guide :
>
http://www.centos.org/docs/4/4.5/SAC_Cluster_Suite_Overview/s2-fencing-o
verview-CSO.html
>
>
> Any other links/information is much appreciated.
>
> Thanks
>
>
Thanks
Gowrishankar Rajaiyan
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
https://www.redhat.com/archives/linux-cluster/attachments/20080625/44ab2
a21/attachment.html
------------------------------
Message: 3
Date: Wed, 25 Jun 2008 10:55:49 +0200
From: "Gian Paolo Buono" <gpbuono at gmail.com>
Subject: Re: [Linux-cluster] can't communicate with fenced -1
To: "linux clustering" <linux-cluster at redhat.com>
Message-ID:
<c60a46e50806250155l6c4eacc2s190d36b0eb34ffb8 at mail.gmail.com>
Content-Type: text/plain; charset="iso-8859-1"
Hi,
if I try to restart on yoda2 cman
[root at yoda2 ~]# /etc/init.d/cman restart
Stopping cluster:
Stopping fencing... done
Stopping cman... done
Stopping ccsd... done
Unmounting configfs... done
[ OK ]
Starting cluster:
Enabling workaround for Xend bridged networking... done
Loading modules... done
Mounting configfs... done
Starting ccsd... done
Starting cman... done
Starting daemons... done
Starting fencing... failed
[FAILED]
[root at yoda2 ~]# tail -f /var/log/messages
Jun 25 10:50:42 yoda2 openais[18429]: [CLM ] Members Joined:
Jun 25 10:50:42 yoda2 openais[18429]: [CLM ] r(0) ip(172.20.0.174)
Jun 25 10:50:42 yoda2 openais[18429]: [SYNC ] This node is within the
primary component and will provide service.
Jun 25 10:50:42 yoda2 openais[18429]: [TOTEM] entering OPERATIONAL
state.
Jun 25 10:50:42 yoda2 openais[18429]: [CLM ] got nodejoin message
172.20.0.174
Jun 25 10:50:42 yoda2 openais[18429]: [CLM ] got nodejoin message
172.20.0.175
Jun 25 10:50:42 yoda2 openais[18429]: [CPG ] got joinlist message from
node
2
Jun 25 10:50:42 yoda2 openais[18429]: [CMAN ] cman killed by node 1
because
we were killed by cman_tool or other application
Jun 25 10:50:42 yoda2 ccsd[18421]: Initial status:: Quorate
Jun 25 10:50:43 yoda2 gfs_controld[18455]: cman_init error 111
Jun 25 10:51:10 yoda2 ccsd[18421]: Unable to connect to cluster
infrastructure after 30 seconds.
Jun 25 10:51:37 yoda2 snmpd[4764]: Connection from UDP:
[172.20.0.32]:55090
on this server there are 3 xen domu and i can't to reboot yoda2 :( ..
best regards.. and sorry for my english :)
2008/6/25 GS R <gsrlinux at gmail.com>:
>
>>
>>
>> 2008/6/25 GS R <gsrlinux at gmail.com>:
>>
>>>
>>>
>>> On 6/24/08, Gian Paolo Buono <gpbuono at gmail.com> wrote:
>>>
>>>> Hi,
>>>>
>>>> We have two RHEL5.1 boxes installed sharing a
>>>> single iscsi emc2 SAN, whitout fence devices. System is configured
>>>>
>>>>
>>>>
>>>> as a high-availability system of xen guest.
>>>>
>>>> One of the most repeating problems are fence_tool related.
>>>>
>>>> # service cman start
>>>> Starting cluster:
>>>> Loading modules... done
>>>> Mounting configfs... done
>>>> Starting ccsd... done
>>>> Starting cman... done
>>>> Starting daemons... done
>>>> Starting fencing... fence_tool: can't communicate with fenced -1
>>>>
>>>>
>>>>
>>>>
>>>> # fenced -D
>>>> 1204556546 cman_init error 0 111
>>>>
>>>> # clustat
>>>> CMAN is not running.
>>>>
>>>> # cman_tool join
>>>>
>>>> # clustat
>>>> msg_open: Connection refused
>>>>
>>>> Member Status: Quorate
>>>> Member Name ID Status
>>>>
>>>> ------ ---- ---- ------
>>>> yoda1 1 Online, Local
>>>> yoda2 2 Offline
>>>>
>>>> Sometimes this problem gets solved if the two machines are rebooted
at
>>>>
>>>>
>>>>
>>>>
>>>> the same time. But in the current HA configuration, I cannot
guarantee
>>>> two systems will be rebooted at the same time for every problem we
>>>> face. This is my config file:
>>>>
>>>>
###################################cluster.conf#########################
###########
>>>>
>>>>
>>>>
>>>>
>>>> <?xml version="1.0"?>
>>>> <cluster alias="yoda-cl" config_version="2" name="yoda-cl">
>>>> <fence_daemon clean_start="0" post_fail_delay="0"
post_join_delay="3"/>
>>>>
>>>>
>>>>
>>>>
>>>> <clusternodes>
>>>> <clusternode name="yoda2" nodeid="1" votes="1">
>>>> <fence/>
>>>> </clusternode>
>>>> <clusternode name="yoda1" nodeid="2" votes="1">
>>>>
>>>>
>>>>
>>>>
>>>> <fence/>
>>>> </clusternode>
>>>> </clusternodes>
>>>> <cman expected_votes="1" two_node="1"/>
>>>> <rm>
>>>> <failoverdomains/>
>>>>
>>>>
>>>>
>>>>
>>>> <resources/>
>>>> </rm>
>>>> <fencedevices/>
>>>> </cluster>
>>>>
###################################cluster.conf#########################
###########
>>>> Regards.
>>>>
>>>> Hi
>>>
>>> I configured a two node cluster with no fence device on RHEL5.1.
>>> The cluster started and stopped with no issues. The only difference
that
>>> I see is that I have used FQDN in my cluster.conf
>>>
>>> i.e., <clusternode name="yoda2*.gsr.com*" nodeid="1" votes="1">
>>>
>>> Check your /etc/hosts if it has the FQDN in it.
>>>
>>> Thanks
>>> Gowrishankar Rajaiyan
>>>
>>>
>>>
>>
>
> On 6/25/08, Gian Paolo Buono <gpbuono at gmail.com> wrote:
>
>> Hi,
>> the problem of my cluster is that it start-up weel but after two days
the
>> problem that I have described is running, and this problem gets
solved if
>> the two machines are rebooted at the same time.
>>
>> Thanks
>> Gian Paolo
>>
>
>
> Hi Gian
>
> Could you please attach the logs.
>
> Thanks
> Gowrishankar Rajaiyan
>
> --
> Linux-cluster mailing list
> Linux-cluster at redhat.com
> https://www.redhat.com/mailman/listinfo/linux-cluster
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
https://www.redhat.com/archives/linux-cluster/attachments/20080625/03101
f0d/attachment.html
------------------------------
Message: 4
Date: Wed, 25 Jun 2008 11:24:04 +0200
From: "Gian Paolo Buono" <gpbuono at gmail.com>
Subject: Re: [Linux-cluster] can't communicate with fenced -1
To: "linux clustering" <linux-cluster at redhat.com>
Message-ID:
<c60a46e50806250224x5a2ed28bn32a57e0f3baab578 at mail.gmail.com>
Content-Type: text/plain; charset="iso-8859-1"
Hi,
an other problem the process clurgmgrd don't dead:
[root at yoda2 ~]# /etc/init.d/rgmanager stop
Shutting down Cluster Service Manager...
Waiting for services to stop:
but nothing to do...
[root at yoda2 ~]# ps -ef | grep clurgmgrd
root 6620 1 55 Jun03 ? 12-02:06:46 clurgmgrd
[root at yoda2 ~]# kill -9 6620
[root at yoda2 ~]# ps -ef | grep clurgmgrd
and the process clvmd
[root at yoda2 ~]# /etc/init.d/clvmd status
clvmd dead but subsys locked
active volumes: LV06 LV_nex2
help me ... i don't want reboot the yoda2 ...
bye
On Wed, Jun 25, 2008 at 10:55 AM, Gian Paolo Buono <gpbuono at gmail.com>
wrote:
> Hi,
> if I try to restart on yoda2 cman
> [root at yoda2 ~]# /etc/init.d/cman restart
> Stopping cluster:
> Stopping fencing... done
> Stopping cman... done
> Stopping ccsd... done
> Unmounting configfs... done
> [ OK ]
> Starting cluster:
> Enabling workaround for Xend bridged networking... done
> Loading modules... done
> Mounting configfs... done
> Starting ccsd... done
> Starting cman... done
> Starting daemons... done
> Starting fencing... failed
>
> [FAILED]
> [root at yoda2 ~]# tail -f /var/log/messages
> Jun 25 10:50:42 yoda2 openais[18429]: [CLM ] Members Joined:
> Jun 25 10:50:42 yoda2 openais[18429]: [CLM ] r(0) ip(172.20.0.174)
> Jun 25 10:50:42 yoda2 openais[18429]: [SYNC ] This node is within the
> primary component and will provide service.
> Jun 25 10:50:42 yoda2 openais[18429]: [TOTEM] entering OPERATIONAL
state.
> Jun 25 10:50:42 yoda2 openais[18429]: [CLM ] got nodejoin message
> 172.20.0.174
> Jun 25 10:50:42 yoda2 openais[18429]: [CLM ] got nodejoin message
> 172.20.0.175
> Jun 25 10:50:42 yoda2 openais[18429]: [CPG ] got joinlist message
from
> node 2
> Jun 25 10:50:42 yoda2 openais[18429]: [CMAN ] cman killed by node 1
because
> we were killed by cman_tool or other application
> Jun 25 10:50:42 yoda2 ccsd[18421]: Initial status:: Quorate
> Jun 25 10:50:43 yoda2 gfs_controld[18455]: cman_init error 111
> Jun 25 10:51:10 yoda2 ccsd[18421]: Unable to connect to cluster
> infrastructure after 30 seconds.
> Jun 25 10:51:37 yoda2 snmpd[4764]: Connection from UDP: [172.20.0.32
> ]:55090
>
>
> on this server there are 3 xen domu and i can't to reboot yoda2 :( ..
>
> best regards.. and sorry for my english :)
>
> 2008/6/25 GS R <gsrlinux at gmail.com>:
>
>>
>>>
>>>
>>> 2008/6/25 GS R <gsrlinux at gmail.com>:
>>>
>>>>
>>>>
>>>> On 6/24/08, Gian Paolo Buono <gpbuono at gmail.com> wrote:
>>>>
>>>>> Hi,
>>>>>
>>>>> We have two RHEL5.1 boxes installed sharing a
>>>>> single iscsi emc2 SAN, whitout fence devices. System is configured
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> as a high-availability system of xen guest.
>>>>>
>>>>> One of the most repeating problems are fence_tool related.
>>>>>
>>>>> # service cman start
>>>>> Starting cluster:
>>>>> Loading modules... done
>>>>> Mounting configfs... done
>>>>> Starting ccsd... done
>>>>> Starting cman... done
>>>>> Starting daemons... done
>>>>> Starting fencing... fence_tool: can't communicate with fenced -1
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> # fenced -D
>>>>> 1204556546 cman_init error 0 111
>>>>>
>>>>> # clustat
>>>>> CMAN is not running.
>>>>>
>>>>> # cman_tool join
>>>>>
>>>>> # clustat
>>>>> msg_open: Connection refused
>>>>>
>>>>> Member Status: Quorate
>>>>> Member Name ID Status
>>>>>
>>>>> ------ ---- ---- ------
>>>>> yoda1 1 Online, Local
>>>>> yoda2 2 Offline
>>>>>
>>>>> Sometimes this problem gets solved if the two machines are
rebooted at
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> the same time. But in the current HA configuration, I cannot
guarantee
>>>>> two systems will be rebooted at the same time for every problem we
>>>>> face. This is my config file:
>>>>>
>>>>>
###################################cluster.conf#########################
###########
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> <?xml version="1.0"?>
>>>>> <cluster alias="yoda-cl" config_version="2" name="yoda-cl">
>>>>> <fence_daemon clean_start="0" post_fail_delay="0"
post_join_delay="3"/>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> <clusternodes>
>>>>> <clusternode name="yoda2" nodeid="1" votes="1">
>>>>> <fence/>
>>>>> </clusternode>
>>>>> <clusternode name="yoda1" nodeid="2" votes="1">
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> <fence/>
>>>>> </clusternode>
>>>>> </clusternodes>
>>>>> <cman expected_votes="1" two_node="1"/>
>>>>> <rm>
>>>>> <failoverdomains/>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> <resources/>
>>>>> </rm>
>>>>> <fencedevices/>
>>>>> </cluster>
>>>>>
###################################cluster.conf#########################
###########
>>>>> Regards.
>>>>>
>>>>> Hi
>>>>
>>>> I configured a two node cluster with no fence device on RHEL5.1.
>>>> The cluster started and stopped with no issues. The only difference
that
>>>> I see is that I have used FQDN in my cluster.conf
>>>>
>>>> i.e., <clusternode name="yoda2*.gsr.com*" nodeid="1" votes="1">
>>>>
>>>> Check your /etc/hosts if it has the FQDN in it.
>>>>
>>>> Thanks
>>>> Gowrishankar Rajaiyan
>>>>
>>>>
>>>>
>>>
>>
>> On 6/25/08, Gian Paolo Buono <gpbuono at gmail.com> wrote:
>>
>>> Hi,
>>> the problem of my cluster is that it start-up weel but after two
days the
>>> problem that I have described is running, and this problem gets
solved if
>>> the two machines are rebooted at the same time.
>>>
>>> Thanks
>>> Gian Paolo
>>>
>>
>>
>> Hi Gian
>>
>> Could you please attach the logs.
>>
>> Thanks
>> Gowrishankar Rajaiyan
>>
>> --
>> Linux-cluster mailing list
>> Linux-cluster at redhat.com
>> https://www.redhat.com/mailman/listinfo/linux-cluster
>>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
https://www.redhat.com/archives/linux-cluster/attachments/20080625/b39eb
e5e/attachment.html
------------------------------
Message: 5
Date: Wed, 25 Jun 2008 15:26:45 +0530
From: GS R <gsrlinux at gmail.com>
Subject: Re: [Linux-cluster] can't communicate with fenced -1
To: linux clustering <linux-cluster at redhat.com>
Message-ID: <4862165D.3030105 at gmail.com>
Content-Type: text/plain; charset="iso-8859-1"
Hi Gian,
I too faced the same issue. Rebooting the system is indeed the easy
solution here.
I could do it because it was my test setup.
1. Have you added any resources to this cluster?
2. Have you configured any services to this cluster?
3. Have you tried using a fence device. i.e., fence_manual?
4. Is there at times a heavy load on your network?
5. Have you opened all the ports on your firewall?
Thanks
Gowrishankar Rajaiyan
Gian Paolo Buono wrote:
> Hi,
> an other problem the process clurgmgrd don't dead:
>
> [root at yoda2 ~]# /etc/init.d/rgmanager stop
> Shutting down Cluster Service Manager...
> Waiting for services to stop:
>
> but nothing to do...
>
> [root at yoda2 ~]# ps -ef | grep clurgmgrd
> root 6620 1 55 Jun03 ? 12-02:06:46 clurgmgrd
> [root at yoda2 ~]# kill -9 6620
> [root at yoda2 ~]# ps -ef | grep clurgmgrd
>
> and the process clvmd
>
> [root at yoda2 ~]# /etc/init.d/clvmd status
> clvmd dead but subsys locked
> active volumes: LV06 LV_nex2
>
> help me ... i don't want reboot the yoda2 ...
>
> bye
>
>
> On Wed, Jun 25, 2008 at 10:55 AM, Gian Paolo Buono <gpbuono at gmail.com
> <mailto:gpbuono at gmail.com>> wrote:
>
> Hi,
> if I try to restart on yoda2 cman
> [root at yoda2 ~]# /etc/init.d/cman restart
> Stopping cluster:
> Stopping fencing... done
> Stopping cman... done
> Stopping ccsd... done
> Unmounting configfs... done
> [ OK
]
> Starting cluster:
> Enabling workaround for Xend bridged networking... done
>
> Loading modules... done
> Mounting configfs... done
> Starting ccsd... done
> Starting cman... done
> Starting daemons... done
> Starting fencing... failed
>
>
[FAILED]
> [root at yoda2 ~]# tail -f /var/log/messages
> Jun 25 10:50:42 yoda2 openais[18429]: [CLM ] Members Joined:
> Jun 25 10:50:42 yoda2 openais[18429]: [CLM ] r(0)
> ip(172.20.0.174 <http://172.20.0.174>)
> Jun 25 10:50:42 yoda2 openais[18429]: [SYNC ] This node is within
> the primary component and will provide service.
> Jun 25 10:50:42 yoda2 openais[18429]: [TOTEM] entering OPERATIONAL
> state.
> Jun 25 10:50:42 yoda2 openais[18429]: [CLM ] got nodejoin message
> 172.20.0.174 <http://172.20.0.174>
> Jun 25 10:50:42 yoda2 openais[18429]: [CLM ] got nodejoin message
> 172.20.0.175 <http://172.20.0.175>
> Jun 25 10:50:42 yoda2 openais[18429]: [CPG ] got joinlist message
> from node 2
> Jun 25 10:50:42 yoda2 openais[18429]: [CMAN ] cman killed by node
> 1 because we were killed by cman_tool or other application
> Jun 25 10:50:42 yoda2 ccsd[18421]: Initial status:: Quorate
> Jun 25 10:50:43 yoda2 gfs_controld[18455]: cman_init error 111
> Jun 25 10:51:10 yoda2 ccsd[18421]: Unable to connect to cluster
> infrastructure after 30 seconds.
> Jun 25 10:51:37 yoda2 snmpd[4764]: Connection from UDP:
> [172.20.0.32 <http://172.20.0.32>]:55090
>
>
> on this server there are 3 xen domu and i can't to reboot yoda2 :(
..
>
> best regards.. and sorry for my english :)
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
https://www.redhat.com/archives/linux-cluster/attachments/20080625/0f4ff
35e/attachment.html
------------------------------
--
Linux-cluster mailing list
Linux-cluster at redhat.com
https://www.redhat.com/mailman/listinfo/linux-cluster
End of Linux-cluster Digest, Vol 50, Issue 32
*********************************************
More information about the Linux-cluster
mailing list