[Linux-cluster] 3 node cluster problems
Dalton, Maurice
bobby.m.dalton at nasa.gov
Mon Mar 24 19:05:09 UTC 2008
The last post is incorrect.
Fence is still hanging at start up.
Here's another log message.
Mar 24 19:03:14 csarcsys3-eth0 ccsd[6425]: Error while processing
connect: Connection refused
Mar 24 19:03:15 csarcsys3-eth0 dlm_controld[6453]: connect to ccs error
-111, check ccsd or cluster status
From: linux-cluster-bounces at redhat.com
[mailto:linux-cluster-bounces at redhat.com] On Behalf Of Bennie Thomas
Sent: Monday, March 24, 2008 11:22 AM
To: linux clustering
Subject: Re: [Linux-cluster] 3 node cluster problems
try removing the fully qualified hostname from the cluster.conf file.
Dalton, Maurice wrote:
I have NO fencing equipment
I have been task to setup a 3 node cluster
Currently I have having problems getting cman(fence) to start
Fence will try to start up during cman start up but will fail
I tried to run /sbin/fenced -D - I get the following
1206373475 cman_init error 0 111
Here's my cluster.conf file
<?xml version="1.0"?>
<cluster alias="csarcsys51" config_version="26" name="csarcsys51">
<fence_daemon clean_start="0" post_fail_delay="0"
post_join_delay="3"/>
<clusternodes>
<clusternode name="csarcsys1-eth0.xxx.xxxx.nasa.gov"
nodeid="1" votes="1">
<fence/>
</clusternode>
<clusternode name="csarcsys2-eth0.xxx.xxxx.nasa.gov"
nodeid="2" votes="1">
<fence/>
</clusternode>
<clusternode name="csarcsys3-eth0.xxx.xxxxnasa.gov"
nodeid="3" votes="1">
<fence/>
</clusternode>
</clusternodes>
<cman/>
<fencedevices/>
<rm>
<failoverdomains>
<failoverdomain name="csarcsys-fo" ordered="1"
restricted="0">
<failoverdomainnode
name="csarcsys1-eth0.xxx.xxxx.nasa.gov" priority="1"/>
<failoverdomainnode
name="csarcsys2-eth0.xxx.xxxx.nasa.gov" priority="1"/>
<failoverdomainnode
name="csarcsys2-eth0.xxx.xxxx.nasa.gov" priority="1"/>
</failoverdomain>
</failoverdomains>
<resources>
<ip address="xxx.xxx.xxx.xxx" monitor_link="1"/>
<fs device="/dev/sdc1" force_fsck="0"
force_unmount="1" fsid="57739" fstype="ext3" mountpo
int="/csarc-test" name="csarcsys-fs" options="rw" self_fence="0"/>
<nfsexport name="csarcsys-export"/>
<nfsclient name="csarcsys-nfs-client"
options="no_root_squash,rw" path="/csarc-test" targe
t="xxx.xxx.xxx.*"/>
</resources>
</rm>
</cluster>
Messages from the logs
ar 24 13:24:19 csarcsys2-eth0 ccsd[24888]: Cluster is not quorate.
Refusing connection.
Mar 24 13:24:19 csarcsys2-eth0 ccsd[24888]: Error while processing
connect: Connection refused
Mar 24 13:24:20 csarcsys2-eth0 ccsd[24888]: Cluster is not quorate.
Refusing connection.
Mar 24 13:24:20 csarcsys2-eth0 ccsd[24888]: Error while processing
connect: Connection refused
Mar 24 13:24:21 csarcsys2-eth0 ccsd[24888]: Cluster is not quorate.
Refusing connection.
Mar 24 13:24:21 csarcsys2-eth0 ccsd[24888]: Error while processing
connect: Connection refused
Mar 24 13:24:22 csarcsys2-eth0 ccsd[24888]: Cluster is not quorate.
Refusing connection.
Mar 24 13:24:22 csarcsys2-eth0 ccsd[24888]: Error while processing
connect: Connection refused
Mar 24 13:24:23 csarcsys2-eth0 ccsd[24888]: Cluster is not quorate.
Refusing connection.
Mar 24 13:24:23 csarcsys2-eth0 ccsd[24888]: Error while processing
connect: Connection refused
________________________________
--
Linux-cluster mailing list
Linux-cluster at redhat.com
https://www.redhat.com/mailman/listinfo/linux-cluster
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://listman.redhat.com/archives/linux-cluster/attachments/20080324/0682d083/attachment.htm>
More information about the Linux-cluster
mailing list