[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Re: [Linux-cluster] 3 node cluster problems



You will also, need to make sure the clustered nodenames are in your /etc/hosts file. Also, make sure your cluster network interface is up on all nodes and that the
/etc/cluster/cluster.conf are the same on all nodes.



Dalton, Maurice wrote:

The last post is incorrect.

Fence is still hanging at start up.

Here’s another log message.

Mar 24 19:03:14 csarcsys3-eth0 ccsd[6425]: Error while processing connect: Connection refused

Mar 24 19:03:15 csarcsys3-eth0 dlm_controld[6453]: connect to ccs error -111, check ccsd or cluster status

*From:* linux-cluster-bounces redhat com [mailto:linux-cluster-bounces redhat com] *On Behalf Of *Bennie Thomas
*Sent:* Monday, March 24, 2008 11:22 AM
*To:* linux clustering
*Subject:* Re: [Linux-cluster] 3 node cluster problems

try removing the fully qualified hostname from the cluster.conf file.


Dalton, Maurice wrote:

I have NO fencing equipment

I have been task to setup a 3 node cluster

Currently I have having problems getting cman(fence) to start

Fence will try to start up during cman start up but will fail

I tried to run /sbin/fenced –D - I get the following

1206373475 cman_init error 0 111

Here’s my cluster.conf file

<?xml version="1.0"?>

<cluster alias="csarcsys51" config_version="26" name="csarcsys51">

<fence_daemon clean_start="0" post_fail_delay="0" post_join_delay="3"/>

<clusternodes>

<clusternode name="csarcsys1-eth0.xxx.xxxx.nasa.gov" nodeid="1" votes="1">

<fence/>

</clusternode>

<clusternode name="csarcsys2-eth0.xxx.xxxx.nasa.gov" nodeid="2" votes="1">

<fence/>

</clusternode>

<clusternode name="csarcsys3-eth0.xxx.xxxxnasa.gov" nodeid="3" votes="1">

<fence/>

</clusternode>

</clusternodes>

<cman/>

<fencedevices/>

<rm>

<failoverdomains>

<failoverdomain name="csarcsys-fo" ordered="1" restricted="0">

<failoverdomainnode name="csarcsys1-eth0.xxx.xxxx.nasa.gov" priority="1"/>

<failoverdomainnode name="csarcsys2-eth0.xxx.xxxx.nasa.gov" priority="1"/>

<failoverdomainnode name="csarcsys2-eth0.xxx.xxxx.nasa.gov" priority="1"/>

</failoverdomain>

</failoverdomains>

<resources>

<ip address="xxx.xxx.xxx.xxx" monitor_link="1"/>

<fs device="/dev/sdc1" force_fsck="0" force_unmount="1" fsid="57739" fstype="ext3" mountpo

int="/csarc-test" name="csarcsys-fs" options="rw" self_fence="0"/>

<nfsexport name="csarcsys-export"/>

<nfsclient name="csarcsys-nfs-client" options="no_root_squash,rw" path="/csarc-test" targe

t="xxx.xxx.xxx.*"/>

</resources>

</rm>

</cluster>

Messages from the logs

ar 24 13:24:19 csarcsys2-eth0 ccsd[24888]: Cluster is not quorate. Refusing connection.

Mar 24 13:24:19 csarcsys2-eth0 ccsd[24888]: Error while processing connect: Connection refused

Mar 24 13:24:20 csarcsys2-eth0 ccsd[24888]: Cluster is not quorate. Refusing connection.

Mar 24 13:24:20 csarcsys2-eth0 ccsd[24888]: Error while processing connect: Connection refused

Mar 24 13:24:21 csarcsys2-eth0 ccsd[24888]: Cluster is not quorate. Refusing connection.

Mar 24 13:24:21 csarcsys2-eth0 ccsd[24888]: Error while processing connect: Connection refused

Mar 24 13:24:22 csarcsys2-eth0 ccsd[24888]: Cluster is not quorate. Refusing connection.

Mar 24 13:24:22 csarcsys2-eth0 ccsd[24888]: Error while processing connect: Connection refused

Mar 24 13:24:23 csarcsys2-eth0 ccsd[24888]: Cluster is not quorate. Refusing connection.

Mar 24 13:24:23 csarcsys2-eth0 ccsd[24888]: Error while processing connect: Connection refused

------------------------------------------------------------------------


--
Linux-cluster mailing list
Linux-cluster redhat com <mailto:Linux-cluster redhat com>
https://www.redhat.com/mailman/listinfo/linux-cluster

------------------------------------------------------------------------

--
Linux-cluster mailing list
Linux-cluster redhat com
https://www.redhat.com/mailman/listinfo/linux-cluster




[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]