[Linux-cluster] cluster-snmp setup question
Jeremy Eder
jeder at invision.net
Tue Nov 4 16:56:47 UTC 2008
Hello,
I have a newly installed rhel4u7 32bit (2node) cluster. I have
cluster-snmp-0.11.1-2.el4 installed, and I have added this to snmpd.conf
per instructions found in
/usr/share/doc/cluster-snmp-0.11.1/README.snmpd
--------
dlmod RedHatCluster /usr/lib/cluster-snmp/libClusterMonitorSnmp.so
view systemview included REDHAT-CLUSTER-MIB:RedHatCluster
--------
The problem is that the system only responds to snmpwalk on this:
root at db1: /etc/snmp # snmpwalk -v1 -c public localhost
.1.3.6.1.4.1.2312.8
SNMPv2-SMI::enterprises.2312.8.1.1.0 = INTEGER: 1
Any other OID silently completes with no output...
root at db1: /etc/snmp # snmpwalk -v1 -c public localhost
.1.3.6.1.4.1.2312.8.2.1.0
root at db1: /etc/snmp #
The 2nd snmpwalk should output the rhcClusterName as a STRING.
Note that REDHAT-MIB and REDHAT-CLUSTER-MIB are installed properly:
-rw-r--r-- 1 root root 7957 Apr 14 2008
/usr/share/snmp/mibs/REDHAT-CLUSTER-MIB
-rw-r--r-- 1 root root 772 Apr 14 2008
/usr/share/snmp/mibs/REDHAT-MIB
Did I miss some step in the setup (are there some services that need to
be started ?)
There are no hits for "snmp" on the cluster-wiki...
-- jer
More information about the Linux-cluster
mailing list