[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Re: [Linux-cluster] adding volume to cluster

On Wed, Oct 1, 2008 at 11:42 AM, Alasdair G Kergon <agk redhat com> wrote:
I hope that problem was fixed in newer packages.

Meanwhile try running 'clvmd -R' between some of the commands.

If all else fails, you may have to kill the clvmd daemons in the cluster
and restart them, or even add a 'vgscan' on each node before the restart.

agk redhat com

Just a sanity check.  I killed all the clvmd daemons and started clvmd back up.  I created the PV on node A:
[root omadvnfs01a ~]# pvcreate /dev/sdh1
  Physical volume "/dev/sdh1" successfully created

Node B knows nothing of /dev/sdh1 but it does exist:
[root omadvnfs01b ~]# ls /dev/sdh*
[root omadvnfs01b ~]# parted /dev/sdh
GNU Parted 1.8.1
Using /dev/sdh
Welcome to GNU Parted! Type 'help' to view a list of commands.
(parted) p                                                               

Model: EQLOGIC 100E-00 (scsi)
Disk /dev/sdh: 4398GB
Sector size (logical/physical): 512B/512B
Partition Table: gpt

Number  Start   End     Size    File system  Name     Flags
 1      17.4kB  4398GB  4398GB               primary      

Maybe this is why the pvcreate and vgcreate aren't tracking with Node B.

[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]