[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

[Linux-cluster] Re: Linux-cluster Digest, Vol 53, Issue 14



Dear All, Currently I have successfully configured IPMILAN fencing to both the servers and Ethernet Channel Bonding as per the below link http://www.redhat.com/docs/manuals/csgfs/browse/rh-cs-en/s1-hardware-connect.html#S2-HARDWARE-ETHBOND After the Fencing and Ethernet Channel Bonding both the servers are getting rebooted alternatively (because of fencing by peer node)

I've attached the following files for your reference
From server-1, (corviewprimary)
1. /var/log/messages ( Refer messages from Sep  10 15:20:22)
2./etc/cluster/cluster.conf
3./etc/sysconfig/network-scripts/ifcfg-eth0
4./etc/sysconfig/network-scripts/ifcfg-eth1
5./etc/sysconfig/network-scripts/ifcfg-bond0
as primary.zip

From server-2, (corviewsecondary)
1. /var/log/messages ( Refer messages from Sep  10 15:24:07)
2./etc/cluster/cluster.conf
3./etc/sysconfig/network-scripts/ifcfg-eth0
4./etc/sysconfig/network-scripts/ifcfg-eth1
5./etc/sysconfig/network-scripts/ifcfg-bond0
as secondary.zip

Is this happening only when i use bonding.

Can some one throw light on this peculiar problem


Regards
-S.Balaji



[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]