[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Re: [Linux-cluster] Cman with two node on different subnet



Thank you for your message.

I've no way to add vlan or configure broadcast cause it's two personal server hosted by one of many webhosting company.

Do you know what happens if I use unicast IP from A, B or C class instead of multicast IP from D class ?

Regards,

Cyril

On 28 nov. 2009, at 20:51, Steven Dake wrote:

> On Sat, 2009-11-28 at 17:05 +0100, Cyril FERAUDET wrote:
>> Hello,
>> 
>> Is possible to have two node on two different subnet, without using multicast ?
>> 
>> I have two dedicated servers directly on the internet on two different subnet without private network.
>> 
>> In fact, both server are on the same switch but in different vlan, so I've no doubt about cluster performance.
>> 
>> Thanks in advance,
>> 
>> Cyril Feraudet
>> 
>> --
> 
> Multicast or broadcast capabilities in your network are required.
> 
> It is possible to operate between subnets however, if you setup a VLAN.
> The configuration for setting up VLANs depends on your switch vendor's
> config.
> 
> Regards
> -steve
> 
> 
>> Linux-cluster mailing list
>> Linux-cluster redhat com
>> https://www.redhat.com/mailman/listinfo/linux-cluster
> 
> --
> Linux-cluster mailing list
> Linux-cluster redhat com
> https://www.redhat.com/mailman/listinfo/linux-cluster



[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]