[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Re: [Linux-cluster] Cman with two node on different subnet



On Sat, 2009-11-28 at 22:55 +0100, Cyril FERAUDET wrote:
> Thank you for your message.
> 
> I've no way to add vlan or configure broadcast cause it's two personal server hosted by one of many webhosting company.
> 
> Do you know what happens if I use unicast IP from A, B or C class instead of multicast IP from D class ?
> 

There is no way to configure a unicast mode of operation.

regards
-steve

> Regards,
> 
> Cyril
> 
> On 28 nov. 2009, at 20:51, Steven Dake wrote:
> 
> > On Sat, 2009-11-28 at 17:05 +0100, Cyril FERAUDET wrote:
> >> Hello,
> >> 
> >> Is possible to have two node on two different subnet, without using multicast ?
> >> 
> >> I have two dedicated servers directly on the internet on two different subnet without private network.
> >> 
> >> In fact, both server are on the same switch but in different vlan, so I've no doubt about cluster performance.
> >> 
> >> Thanks in advance,
> >> 
> >> Cyril Feraudet
> >> 
> >> --
> > 
> > Multicast or broadcast capabilities in your network are required.
> > 
> > It is possible to operate between subnets however, if you setup a VLAN.
> > The configuration for setting up VLANs depends on your switch vendor's
> > config.
> > 
> > Regards
> > -steve
> > 
> > 
> >> Linux-cluster mailing list
> >> Linux-cluster redhat com
> >> https://www.redhat.com/mailman/listinfo/linux-cluster
> > 
> > --
> > Linux-cluster mailing list
> > Linux-cluster redhat com
> > https://www.redhat.com/mailman/listinfo/linux-cluster
> 


[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]