[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Re: [Linux-cluster] Multiple communication channels



On 12/29/2010 02:49 PM, Kit Gerrits wrote:
> Hello,
>  
> AFAIK, Multi-interface heartbeat is something that was only recently
> added to RHCS (earlier this year, if I recall correctly).
>  
> Until then, the failover part was usually achieved by using a bonded
> interface as heartbeat interface.
> If possible, I would suggest using 2 (connected) Multicast switches and
> running a bond from each server to each switch.
> Or 2 regular switches and broadcast heartbeat (switches only connected
> to eachother)
> Otherwise, using an active-active bond (channel?) with 2 crossover
> cables might also work, but offers less protection against interface
> failures.
>  
>  
> Regards,
>  
> Kit

Hi,

  It was around in el5. Perhaps not in the early versions, I am not sure
exactly when it was added, but certainly by 5.4.

  In the recent 3.x branch, openais was replaced by corosync (for core
cluster communications), which is where rrp is controlled.

  Of course, I could always be wrong. :)

Cheers.

-- 
Digimer
E-Mail: digimer alteeve com
AN!Whitepapers: http://alteeve.com
Node Assassin:  http://nodeassassin.org


[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]