[Linux-cluster] Fedora 13 Clustering

[Chris Feist]

On 07/14/10 03:55, Jason Fitzpatrick wrote:
> Hi John..
>
> re: "However, in F13 there is no "luci_admin" utility to set the
> password and Luci isn't accessible from a web browser."

Just a note, luci in F11,12,13,etc. Is completely non-functional.  It is missing 
large sections of code to even make it work.  There is the possibility that a 
working luci will be present in F14, but right now the only way to configure the 
cluster is by editing the cluster.conf file.

>
> I found the same myself when trying to configure, using the luci_admin
> from RHEL 5 did not work either, I even went as far as e-mailing the
> dev from Redhat who compiled the FC13 version to try and get the
> default password but have had no reply (e-mail sent from work account
> and I do not have access to it at the moment)
>
> as for the Luci not being available, I believe that it is now running
> on a different port, from what I can remember it is now on 8080 ( a
> netstat -an| grep luci should get the port)
>
> When you load this up you get a demo version of Luci with systems
> populated, and it looks nice!
>
> I also tried the RHEL version of Luci against the FC13 cluster with
> mixed results (if you count it not working as a mixed result!)
>
> Jay
>
> On 12 July 2010 15:06, Virginian<virginian at blueyonder.co.uk>  wrote:
>> Hi Gordon,
>>
>> It looks to me like things have changed quite a bit in F13 compared to RHEL
>> / Centos 5. I agree, cluster.conf  looks the same but there is a new
>> component called Corosync and ccs seems to have gone.
>>
>> Traditionally I have used Conga to configure the Cluster (although not
>> without problems at times it has to be said). However, in F13 there is no
>> "luci_admin" utility to set the password and Luci isn't accessible from a
>> web browser. I don't mind configuring things by hand if that's the only way
>> to do it, I was just looking to be pointed in the right direction really. I
>> have received some help offline from a member of this list which has proved
>> invaluable. I have now managed to get a basic cluster up and running on F13.
>> Our fellow list member is working on a document which I think will be of
>> enormous help to others when completed (in fact it is already a useful doc).
>>
>> The old docs specified which ports / protocols needed to be opened up in
>> iptables but as I haven't sussed out what's needed under F13 I am running
>> with iptables stopped for now. If anybody has this information I would be
>> very grateful to receive it.
>>
>> Thanks&  regards
>>
>> John
>>
>> ----- Original Message ----- From: "Gordan Bobic"<gordan at bobich.net>
>> To: "linux clustering"<linux-cluster at redhat.com>
>> Sent: Monday, July 12, 2010 2:47 PM
>> Subject: Re: [Linux-cluster] Fedora 13 Clustering
>>
>>
>>> Maybe I'm missing what exactly you guys are talking about, but
>>> everything I can think of in RHCS is configured via cluster.conf. My
>>> cluster.conf files from RHEL5 work just fine on RHEL6 beta, which is
>>> virtually identical to F12/F13. I don't see why you would have any
>>> problems getting RHCS to work on F13 using the same instructions you
>>> would follow for RHEL/CentOS 5.
>>>
>>> Gordan
>>>
>>> On Mon, 2010-07-12 at 14:37 +0100, Jason Fitzpatrick wrote:
>>>>
>>>> Hi John..
>>>>
>>>> Normally I do not agree with replying to posts without anything
>>>> constructive to say but I thought that I should in this case.
>>>>
>>>> I have to admit that I ran into the same issues as you, I built a RHEL
>>>> 5.5 cluster and decided to give the FC13 path a try, Tried to use Luci
>>>> / Ricci to configure the nodes and had no luck even managing to log
>>>> into Luci, no documents / man pages included with the packages and the
>>>> readme file that was included was the same one that was included with
>>>> the old source files, and had not been updated since.
>>>>
>>>> In the end I gave up and went back to RHEL.
>>>>
>>>> (that said you can go the heartbeat route, this I got to work when
>>>> using oracles ocfs as a shared data store on drbd)
>>>>
>>>> Jay
>>>>
>>>> On 9 July 2010 21:43, Virginian<virginian at blueyonder.co.uk>  wrote:
>>>>> Hi All,
>>>>>
>>>>> I've played around with Red Hat Cluster Suite on Centos 5 and found>
>>>>> plenty
>>>>> of information on how to install and configure the cluster and nodes. I
>>>>>> have
>>>>> been trawling Google and other search engines trying to find accurate
>>>>> instructions for running Cluster Suite on Fedora 13. So far I have>
>>>>> pretty
>>>>> much drawn a blank. What I am looking for is instructions on how to
>>>>> configure a 2 node cluster with iSCSI shared storage for GFS2, the aim
>>>>>> being
>>>>> to run virtualised Linux guests under KVM and have the ability to>
>>>>> migrate
>>>>> the guests from one node to the other in the event of a node failure.>
>>>>> From
>>>>> what I have read, what I understood to be RHCS in RHEL 5 / Centos 5 has
>>>>> changed quite significantly. It looks like openais / corosync are new
>>>>> components and ccs has largely disappeared. If I could find some>
>>>>> information
>>>>> on how to configure corosync, openais, amf etc. to achieve a fairly>
>>>>> simple 2
>>>>> node cluster as described I think I would be ok. I've tried googling>
>>>>> for
>>>>> this under Fedora 13 but so far drawn a blank. Has anybody else set up
>>>>>> a
>>>>> cluster similar to the above under Fedora 13?
>>>>>
>>>>> Regards
>>>>>
>>>>> John
>>>>> --
>>>>> Linux-cluster mailing list
>>>>> Linux-cluster at redhat.com
>>>>> https://www.redhat.com/mailman/listinfo/linux-cluster
>>>>>
>>>>
>>>>
>>>>
>>>
>>>
>>> --
>>> Linux-cluster mailing list
>>> Linux-cluster at redhat.com
>>> https://www.redhat.com/mailman/listinfo/linux-cluster
>>
>>
>> --
>> Linux-cluster mailing list
>> Linux-cluster at redhat.com
>> https://www.redhat.com/mailman/listinfo/linux-cluster
>>
>
>
>