[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Re: [Linux-cluster] Unable to start cman on FC12 VM's Cluster3



On 3/23/2010 2:54 PM, Digimer wrote:
> On 10-03-23 02:49 AM, Fabio M. Di Nitto wrote:
>> On 3/7/2010 3:26 PM, brem belguebli wrote:
>>> Hi,
>>>
>>> I'm fighting with cman on 2 FC12 VM's (KVM).
>>>
>>> I'm unable to start cman.
>>>
>>> Below my cluster.conf
>>> ------------------------------------------------------------
>>> <?xml version="1.0"?>
>>> <cluster name="fccl1" config_version="3">
>>>
>>>    <clusternodes>
>>>     <clusternode name="node1.localdomain" votes="1" nodeid="1"/>
>>>     <clusternode name="node2.localdomain" votes="1" nodeid="2"/>
>>>    </clusternodes>
>>>     <cman expected_votes="2" two_node="1"/>
>>>    <fencedevices>
>>>    </fencedevices>
>>>
>>>    <rm>
>>>      <failoverdomains/>
>>>      <resources/>
>>>    </rm>
>>> </cluster>
>>> --------------------------------------------------------------
>>>
>>> when running service cman start, it times out and complains that it
>>> cannot join the cluster (timeout waiting for cluster), despite that
>>> corosync is started.
>>> Disabled selinux, nodes are referenced in each node's /etc/hosts.
>>>
>>> Any idea ?
>>
>> Try the following steps:
>>
>> 1) disable iptables
>> 2) add<logging debug="on"/>  before<clusternodes>
>> 3) try to start the cluster with: "/etc/init.d/cman start join"
>>
>> if it still fails, then please collect all the logs from
>> /var/log/cluster.
>>
>> Point 3 is to break the init script at cman startup time. There is no
>> point to load everything else if cman doesn´t work.
>>
>> If the cluster starts, then verify with "cman_tool status" and
>> "cman_tool nodes" that the nodes can see each other and then you can
>> simply execute again "service cman start" to start all the other cluster
>> components.
>>
>> Fabio
> 
> It could also be because there are no fence devices. A fence device is a
> requirement, and without it, the cluster will block.
> 

No, cman doesn´t care about fencing configuration to join the cluster.
If he is getting timeout errors, it´s probably because of iptables or
the nodes can´t talk multicast between them for some other reasons.

Fabio


[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]