For fencing, I’m using HP iLO and server is BL460c G6. Problem is resource is start moving to the passive when the failed node is power on. It is really strange for me. For example, I shutdown the node1 and physically remove the node1 machine from the blade chassis and the clustat output, clustat was still showing that the resource is on node 1, even node 1 is power down and removed from c7000 blade chassis. But when I plugged again the failed node1 on the c7000 blade chassis and it power-on, then clustat is showing that the resource is start moving to the passive node from the failed node.