[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Re: [Linux-cluster] configuring bladecenter fence device



Thanks Hugo

Your gratefully


On Fri, Jan 7, 2011 at 11:09 AM, Hugo Lombard <hal elizium za net> wrote:
> On Fri, Jan 07, 2011 at 10:12:16AM +0530, Parvez Shaikh wrote:
>>
>>                <clusternode name="node1" votes="1">
>>                        <fence>
>>                                <method name="1">
>>                                        <device blade="2" name="chassis_fence"/>
>>                                </method>
>>                        </fence>
>>                </clusternode>
>>
>> Here for "node1" device blade is "2". Does it mean node1 is blade[2]
>> from AMM perspective? So in order to fence out node1 fence_bladecenter
>> would turn off blade[2]?
>>
>
> Hi Parvez
>
> We use BladeCenters for our clusters, and I can confirm that the
> 'blade="2"' parameter will translate to 'blade[2]' on the AMM.  IOW, the
> '2' is the slot number that the blade is in.
>
> Two more things that might be of help:
>
> - The user specified in the 'login' parameter under the fencedevice
>  should be a 'Blade Administrator' for the slots in question.
>
> - If you're running with SELinux enabled, check that the
>  'fenced_can_network_connect' boolean is set to 'on'.
>
> Regards
>
> --
> Hugo Lombard
>
> --
> Linux-cluster mailing list
> Linux-cluster redhat com
> https://www.redhat.com/mailman/listinfo/linux-cluster
>


[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]