[Linux-cluster] iLo3 and RedHat 5.5 : Unable to connect/login to fencing device
Mika i
mika68vaan at gmail.com
Thu Mar 3 19:44:18 UTC 2011
When i added -P like down here:
fence_ipmilan -P -a xxxxxxxxlo -l admin -p xxxxxxxxx -M 'cycle' -v
Everything works, server reboots. But how do i get this "-P" option included
in fence_ipmilan.
How should my cluster.conf look like..that's the question...
2011/3/3 שלום קלמר <sklemer at gmail.com>
> H.
>
> Maybe iLo3 dont support cycle. why not to use the default , which is
> "onoff" . Try it
>
> I think its good enough .
>
> -M method
> Method to fence (onoff or cycle). Default is onoff. Use cycle
> in
> case your management card will power off with default method
> so
> there will be no chance to power machine on by IPMI.
>
>
> On Thu, Mar 3, 2011 at 3:53 PM, Mika i <mika68vaan at gmail.com> wrote:
>
>> this works:
>> ipmitool -H xxxxxilo -I lanplus -U admin -P xxxxxx chassis power cycle
>> Server is rebooted.....
>>
>> but not this:
>> root at fff fence_ipmilan -a xxxxxxxxlo -l admin -p xxxxxxxxx -M 'cycle' -v
>> Rebooting machine @ IPMI:xxixxxxxilo...Spawning: '/usr/bin/ipmitool -I lan
>> -H 'xxxxxxx' -U 'admin' -P 'xxxxx41!' -v chassis power status'...
>> Spawning: '/usr/bin/ipmitool -I lan -H 'xxxxxxx' -U 'admin' -P 'xxxxxx1!'
>> -v chassis power cycle'...
>> Failed
>>
>> cluster.conf
>> ....
>> <method name="1">
>> <device lanplus="1"
>> name="xxxxxx_xxxxdev" timeout="20"/>
>> ......
>>
>> <fencedevice agent="fence_ipmilan" auth="none" ipaddr="xxxxxxxilo"
>> login="admin" method="cycle" name="xxxxuxx32_fencedev" passwd="xxxxx!"/>
>>
>>
>>
>>
>>
>>
>> 2011/3/3 שלום קלמר <sklemer at gmail.com>
>>
>> Hi.
>>> for ilo3 testing you can use :
>>> # fence_ipmilan -a 17x.3x.7x.1xx -p "password" -o status
>>>
>>> fence_ipmilan -h
>>> usage: fence_ipmilan <options>
>>> -A <authtype> IPMI Lan Auth type (md5, password, or none)
>>> -a <ipaddr> IPMI Lan IP to talk to
>>> -i <ipaddr> IPMI Lan IP to talk to (deprecated, use -a)
>>> -p <password> Password (if required) to control power on
>>> IPMI device
>>> -P Use Lanplus
>>> -S <path> Script to retrieve password (if required)
>>> -l <login> Username/Login (if required) to control power
>>> on IPMI device
>>> -o <op> Operation to perform.
>>> Valid operations: on, off, reboot, status
>>> -t <timeout> Timeout (sec) for IPMI operation (default 20)
>>> -C <cipher> Ciphersuite to use (same as ipmitool -C parameter)
>>> -M <method> Method to fence (onoff or cycle (default onoff)
>>> -V Print version and exit
>>> -v Verbose mode
>>>
>>> If no options are specified, the following options will be read
>>> from standard input (one per line):
>>>
>>> auth=<auth> Same as -A
>>> ipaddr=<#> Same as -a
>>> passwd=<pass> Same as -p
>>> passwd_script=<path> Same as -S
>>> lanplus Same as -P
>>> login=<login> Same as -u
>>> option=<op> Same as -o
>>> operation=<op> Same as -o
>>> action=<op> Same as -o
>>> timeout=<timeout> Same as -t
>>> cipher=<cipher> Same as -C
>>> method=<method> Same as -M
>>> verbose Same as -v
>>>
>>>
>>> On Thu, Mar 3, 2011 at 12:21 PM, Mika i <mika68vaan at gmail.com> wrote:
>>>
>>>> hmm.
>>>> Okey: have someone good installation instructions to get this fence_ipmilan to
>>>> work.
>>>> 1. active IPMI/DCMI over LAN in iLo3
>>>> 2. what should i install in server to get fence_ipmilan to work
>>>> Now if i test connection it shows like this.
>>>>
>>>> ipmitool -v -H 17x.3x.7x.1xx -I lanplus -U admin mc info
>>>> Password:
>>>> Get Auth Capabilities error
>>>> Get Auth Capabilities error
>>>> Error issuing Get Channel Authentication Capabilies request
>>>> Error: Unable to establish IPMI v2 / RMCP+ session
>>>> Get Device ID command failed
>>>>
>>>> Can someone help me!
>>>> 2011/3/2 <Jason_Henderson at mitel.com>
>>>>
>>>>>
>>>>>
>>>>> linux-cluster-bounces at redhat.com wrote on 03/02/2011 10:07:38 AM:
>>>>>
>>>>> > Hi
>>>>> >
>>>>> > Is there a way to get cluster-suite Fence to work with Rhel 5.5 and
>>>>> iLo3
>>>>> > I have now in both clusters rhel 5.5 version with:
>>>>> > kernel 2.6.18-194.el5
>>>>> > cman-2.0.115-68.el5_6.1
>>>>> >
>>>>> > But in fence state i get allways message: Unable to connect/login to
>>>>> > fencing device
>>>>> >
>>>>> > Any help - or must i update the cluster to rhel 5.6?
>>>>>
>>>>> What fence agent are you using, fence_ilo?
>>>>> You will need to use the fence_ipmilan agent for iLO3.
>>>>> --
>>>>> Linux-cluster mailing list
>>>>> Linux-cluster at redhat.com
>>>>> https://www.redhat.com/mailman/listinfo/linux-cluster
>>>>>
>>>>
>>>>
>>>> --
>>>> Linux-cluster mailing list
>>>> Linux-cluster at redhat.com
>>>> https://www.redhat.com/mailman/listinfo/linux-cluster
>>>>
>>>
>>>
>>> --
>>> Linux-cluster mailing list
>>> Linux-cluster at redhat.com
>>> https://www.redhat.com/mailman/listinfo/linux-cluster
>>>
>>
>>
>> --
>> Linux-cluster mailing list
>> Linux-cluster at redhat.com
>> https://www.redhat.com/mailman/listinfo/linux-cluster
>>
>
>
> --
> Linux-cluster mailing list
> Linux-cluster at redhat.com
> https://www.redhat.com/mailman/listinfo/linux-cluster
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://listman.redhat.com/archives/linux-cluster/attachments/20110303/bfa8d954/attachment.htm>
More information about the Linux-cluster
mailing list