[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Re: [Linux-cluster] Ricci doesn't work



On 08/13/12 16:38, Chip Burke wrote:
Ricci is seemingly not working through either Luci nor cman_tool. There does't
seem to be a lot of logging to go off of (at least I haven't found it) but what
I did find in the Luci log is as follows:

15:51:06,793 ERROR [luci.lib.ricci_communicator] Error receiving header from
node2.domain.local:11111
Traceback (most recent call last):
   File "/usr/lib64/python2.6/site-packages/luci/lib/ricci_communicator.py",
line 121, in __init__
     hello = self.__receive(self.__timeout_init)
   File "/usr/lib64/python2.6/site-packages/luci/lib/ricci_communicator.py",
line 503, in __receive
     errstr = _('Error reading from %s:%d: %s') \
   File "/usr/lib/python2.6/site-packages/pylons/i18n/translation.py", line 106,
in ugettext
     return pylons.translator.ugettext(value)
   File "/usr/lib/python2.6/site-packages/paste/registry.py", line 137, in
__getattr__
     return getattr(self._current_obj(), attr)
   File "/usr/lib/python2.6/site-packages/paste/registry.py", line 197, in
_current_obj
     'thread' % self.____name__)
TypeError: No object (name: translator) has been registered for this thread
15:51:06,793 ERROR [luci.lib.ricci_helpers] Error receiving header from
node2.XXXX.local:11111
15:51:06,793 ERROR [luci.lib.ricci_helpers] Error retrieving batch number from
node3.XXXXX.local: Error receiving header from node3.XXXXX.local:11111

Cluster config I am trying to push:

<?xml version="1.0"?>
<cluster config_version="27" name="Xanadu">
<clusternodes>
<clusternode name="xanadunode1" nodeid="1">
<fence>
<method name="Method">
<device name="VMWare_Fence" port="XanaduNode1" ssl="on"/>
</method>
</fence>
</clusternode>
<clusternode name="xanadunode2" nodeid="2">
<fence>
<method name="Method">
<device name="VMWare_Fence" port="XanaduNode2" ssl="on"/>
</method>
</fence>
</clusternode>
<clusternode name="xanadunode3" nodeid="3">
<fence>
<method name="Method">
<device name="VMWare_Fence" port="XanaduNode3" ssl="on"/>
</method>
</fence>
</clusternode>
</clusternodes>
<cman expected_votes="6"/>
<fencedevices>
<fencedevice agent="fence_vmware_soap" ipaddr="vsphere.XXXXXX.local"
login="vmwarefence" name="VMWare_Fence" passwd="XXXXXXXX"/>
</fencedevices>
<quorumd label="quorum" votes="3"/>
</cluster>


Running config:

<?xml version="1.0"?>
<cluster config_version="26" name="Xanadu">
<clusternodes>
<clusternode name="xanadunode1" nodeid="1">
<fence>
<method name="Method">
<device name="VMWare_Fence" port="XanaduNode1" ssl="on"/>
</method>
</fence>
</clusternode>
<clusternode name="xanadunode2" nodeid="2">
<fence>
<method name="Method">
<device name="VMWare_Fence" port="XanaduNode2" ssl="on"/>
</method>
</fence>
</clusternode>
<clusternode name="xanadunode3" nodeid="3">
<fence>
<method name="Method">
<device name="VMWare_Fence" port="XanaduNode3" ssl="on"/>
</method>
</fence>
</clusternode>
</clusternodes>
<cman expected_votes="5"/>
<fencedevices>
<fencedevice agent="fence_vmware_soap" ipaddr="vsphere.XXXXX.local"
login="vmwarefence" name="VMWare_Fence" passwd="XXXXXX"/>
</fencedevices>
<quorumd label="quorum" votes="2"/>
</cluster>

Any ideas? SCP and reboots are fun and all, but I would love Ricci to work.

Can you try using ccs to get the current configuration of that node:
ccs -h <host name> --getconf


As well as use ccs to try and set the conf on that node?
ccs -f <cluster.conf file> -h <host name> --setconf

This should let us narrow down whether it's an issue with ricci or luci.

Thanks!
Chris


Thanks!






--
Linux-cluster mailing list
Linux-cluster redhat com
https://www.redhat.com/mailman/listinfo/linux-cluster




[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]