[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Re: [Linux-cluster] Halt nodes in cluster with cable disconnect



The obliterate-peer.sh was restored, but when i make a cable
disconnection or simulate this with ifdown, always the same node
reboot in this case the node without sleep in obliterate-peer.sh
script, this is a normal situation?

On Wed, Jan 25, 2012 at 3:33 PM, Digimer <linux alteeve com> wrote:
> On 01/25/2012 03:31 PM, Miguel Angel Guerrero wrote:
>> Yes i see that the result of commands are:
>>
>> /sbin/fence_node -V
>> /sbin/fence_node 2.0.115 (built Sep 26 2011 13:25:51)
>> Copyright (C) Red Hat, Inc.  2004  All rights reserved.
>> [root wsguardian2 ~]# rpm -q cman
>> cman-2.0.115-85.el5_7.2
>> [root wsguardian2 ~]# uname -a
>> Linux wsguardian2 2.6.18-274.17.1.el5 #1 SMP Tue Jan 10 17:25:58 EST
>> 2012 x86_64 x86_64 x86_64 GNU/Linux
>> [root wsguardian2 ~]# cat /etc/issue
>> CentOS release 5.7 (Final)
>> Kernel \r on an \m
>
> Ah! Ok, you're using EL5 / RHCS v2. The rhcs_fence tool has not been
> tested on EL5, so you will need to go back to "obliterate-peer.sh" and
> manually enter a "sleep 10;" at the start of *one* of the nodes.
>
> Once that is done, test again and see if it works.
>
> --
> Digimer
> E-Mail:              digimer alteeve com
> Papers and Projects: https://alteeve.com



-- 
Atte:
------------------------------------
Miguel Angel Guerrero
Usuario GNU/Linux Registrado #353531
------------------------------------


[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]