[Linux-cluster] Basename mismatch
abdul mujeeb Siddiqui
amujeebs at gmail.com
Wed Jul 16 12:31:12 UTC 2014
Dear segura ,
Thanks for response
1: show your config
<?xml version="1.0"?>
<cluster config_version="10" name="oracleha">
<cman expected_votes="1" two_node="1"/>
<fencedevices>
<fencedevice agent= "fence_ipmilan" ipaddr="10.10.63.93"
login="ADMIN" name="inspuripmi" passwd="xxx"/>
<fencedevice agent = "fence_ilo2" ipaddr="10.10.63.92"
login="test" name="hpipmi" passwd="xxxx"/>
</fencedevices>
<fence_daemon post_fail_delay="0" post_join_delay="60"/>
<clusternodes>
<clusternode name= "192.168.10.10" nodeid="1" >
<fence>
<method name = "1">
<device lanplus = "" name="inspuripmi" action ="reboot"/>
</method>
</fence>
</clusternode>
<clusternode name = "192.168.10.11" nodeid="2">
<fence>
<method name = "1">
<device lanplus = "" name="hpipmi" action ="reboot"/>
</method>
</fence>
</clusternode>
</clusternodes>
<rm>
<failoverdomains/>
<resources/>
<service autostart="1" exclusive="0" name="IP" recovery="relocate">
<ip address="10.10.5.23" monitor_link="on" sleeptime="10"/>
<fs device="/dev/mapper/datavg-lv_orau02" force_unmount="1"
fstype="ext4" mountpoint="/u02" name="/u02"/>
<fs device="/dev/mapper/datavg-lv_orau03" force_unmount="1"
fstype="ext4" mountpoint="/u03" name="/u03"/>
<fs device="/dev/mapper/datavg-lv_orau04" force_unmount="1"
fstype="ext4" mountpoint="/u04" name="/u04"/>
<fs device="/dev/mapper/datavg-lv_orau05" force_unmount="1"
fstype="ext4" mountpoint="/u05" name="/u05"/>
<oracledb home="/u01/app/oracle/product/11.2.0.4/dbhome_1"
name="testvip" type="base" user="oracle" vhost="10.10.5.23"/>
</service>
</rm>
</cluster>
2: show what kind of problem you find, doing what you want to archive
[root at xxxx]# rg_test test /etc/cluster/cluster.conf stop service IP
Running in test mode.
<debug> Validating configuration for testvip
[oracledb] Validating configuration for testvip
basename: missing operand
Try `basename --help' for more information.
Failed to start IP
[root@/usr/share/cluster]# vi oracledb.sh
# Customize these to match your Oracle installation. #
######################################################
#
# 1. Oracle user. Must be the same across all cluster members. In the
event
# that this script is run by the super-user, it will automatically switch
# to the Oracle user and restart. Oracle needs to run as the Oracle
# user, not as root.
#[ -n "$ORACLE_USER" ] || ORACLE_USER=oracle
[ -n "$ORACLE_USER" ] || ORACLE_USER=oracle
#
# 2. Oracle home. This is set up during the installation phase of Oracle.
# From the perspective of the cluster, this is generally the mount point
# you intend to use as the mount point for your Oracle Infrastructure
# service.
#
#[ -n "$ORACLE_HOME" ] || ORACLE_HOME=/mnt/oracle/home
[ -n "$ORACLE_HOME" ] || ORACLE_HOME=/u01/app/oracle/product/
11.2.0.4/dbhome_1
#
# 3. This is your SID. This is set up during oracle installation as well.
#
#[ -n "$ORACLE_SID" ] || ORACLE_SID=orcl
[ -n "$ORACLE_SID" ] || ORACLE_SID=testvip
#
# 4. The oracle user probably doesn't have the permission to write to
# /var/lock/subsys, so use the user's home directory.
#
#[ -n "$LOCKFILE" ] || LOCKFILE="/home/$ORACLE_USER/.oracle-ias.lock"
[ -n "$LOCKFILE" ] || LOCKFILE="$ORACLE_HOME/.oracle-ias.lock"
#[ -n "$LOCKFILE" ] || LOCKFILE="/var/lock/subsys/oracle-ias" # Watch
privileges
#
# 5. Type of Oracle Database. Currently supported: 10g 10g-iAS(untested!)
#[ -n "$ORACLE_TYPE" ] || ORACLE_TYPE="base-em"
[ -n "$ORACLE_TYPE" ] || ORACLE_TYPE="base"
#
# 6. Oracle virtual hostname. This is the hostname you gave Oracle during
# installation.
#
#[ -n "$ORACLE_HOSTNAME" ] || ORACLE_HOSTNAME=svc0.foo.test.com
3: show your cluster
root at xxxx]# clustat
Cluster Status for oracleha @ Tue Apr 8 11:10:30 2014
Member Status: Quorate
Member Name ID Status
------ ---- ---- ------
192.168.10.10 1 Online, Local, rgmanager
192.168.10.11 2 Online, rgmanager
Service Name Owner (Last) State
------- ---- ----- ------ -----
service:IP 192.168.10.10 started
[root at xxx]# clustat
Cluster Status for oracleha @ Tue Apr 8 11:10:30 2014
Member Status: Quorate
Member Name ID Status
------ ---- ---- ------
192.168.10.10 1 Online,rgmanager
192.168.10.11 2 Online,Local,rgmanager
Service Name Owner (Last) State
------- ---- ----- ------ -----
service:IP 192.168.10.11 started
4: without any error and some more information, is realy hard to help you
I am using Oracle 11.2.0.4 Database on Red Hat Cluster Suite 6.5 .
In normal working fine .
When I am using Oracle Service in Cluster.conf as above I am getting ERROR
Try `basename --help' for more information.
Failed to start IP
Database Service unable to start.
I have try all the options given in oracledb.sh but same ERROR
Please help me .
Thanks in advance.
On Tue, Jul 15, 2014 at 6:50 PM, emmanuel segura <emi2fast at gmail.com> wrote:
> 1: show your config
> 2: show what kind of problem you find, doing what you want to archive
> 3: show your cluster
> 4: without any error and some more information, is realy hard to help you
>
> 2014-07-15 16:18 GMT+02:00 abdul mujeeb Siddiqui <amujeebs at gmail.com>:
> > Hello, I have to implemented red hat linux 6.4 cluster suite and trying
> to
> > use Oracle11gr2 on it.But oracle service is unable to start.
> > Listener isnot starting.
> > Anyone have implemented oracle11gr2 so please
> > Send me cluster.conf and oracledb.sh and also listener.ora and
> tnsnames.ora
> > files pls.
> > Thanks in advanced
> >
> >
> > --
> > Linux-cluster mailing list
> > Linux-cluster at redhat.com
> > https://www.redhat.com/mailman/listinfo/linux-cluster
>
>
>
> --
> esta es mi vida e me la vivo hasta que dios quiera
>
> --
> Linux-cluster mailing list
> Linux-cluster at redhat.com
> https://www.redhat.com/mailman/listinfo/linux-cluster
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://listman.redhat.com/archives/linux-cluster/attachments/20140716/b7d0fc44/attachment.htm>
More information about the Linux-cluster
mailing list