[linux-lvm] Strange message with 2.4.8+1.0.1rc1

[Jean-Eric Cuendet]

More:
I made (again) my VG with 12 PVs (3 physical disks with 4 partition
each).
cat /proc/lvm/global gives:

LVM driver LVM version 1.0.1-rc1(17/08/2001)

Total:  1 VG  12 PVs  0 LVs (0 LVs open)
Global: 9779 bytes malloced   IOP version: 10   0:05:25 active

VG:  NORAID_HDX  [12 PV, 0 LV/0 open]  PE Size: 4096 KB
  Usage [KB/PE]: 236244992 /57677 total  0 /0 used  236244992 /57677
free
  PVs: [AA] hda1                  20475904 /4999           0 /0
20475904 /4999  
       [AA] hdb1                  20475904 /4999           0 /0
20475904 /4999  
       [AA] hdc1                  20475904 /4999           0 /0
20475904 /4999  
       [AA] hda5                  20475904 /4999           0 /0
20475904 /4999  
       [AA] hda6                  20475904 /4999           0 /0
20475904 /4999  
       [AA] hda7                  16691200 /4075           0 /0
16691200 /4075  
       [AA] hdb5                  20475904 /4999           0 /0
20475904 /4999  
       [AA] hdb6                  20475904 /4999           0 /0
20475904 /4999  
       [AA] hdb7                  16691200 /4075           0 /0
16691200 /4075  
       [AA] hdc5                  20475904 /4999           0 /0
20475904 /4999  
       [AA] hdc6                  20475904 /4999           0 /0
20475904 /4999  
       [AA] hdc7                  18579456 /4536           0 /0
18579456 /4536  
    LVs: none

Running "vgscan" gives nothing but the VG is active!!!

A dump of vgscan -d is attached.
Thanks.
-jec


> -----Original Message-----
> From: Jean-Eric Cuendet 
> Sent: lundi, 27. août 2001 14:34
> To: linux-lvm at sistina.com
> Subject: [linux-lvm] Strange message with 2.4.8+1.0.1rc1
> 
> 
> 
> Hi,
> I have 3 80Gb disks in LVM. I create a LVM volume group + 
> Logical volume. All is fine. Then, I reboot. After that, it's 
> no more visible. 
> If I run vgscan, nothing is found. vgchange -ay doesn't help 
> either. More, I can't recreate a VG with the same name, but 
> it doesn't appear anywhere (in /dev, /etc nor 
> /proc/lvm/global). If I run a pvcreate on the device that 
> made the VG, it say that these are used by an unknown VG. I 
> must use -ff to recreate them and be able to recreate my VG. 
> But next reboot, it will be lost...
> 
> FYI, I set 8e on all the LVM partitions (4 partitions on each 
> disk) I have 1.0.1rc1 (tools + kernel) and 2.4.8. 
> 
> Any idea?
> Thanks
> -jec
> 
> ---------------------------------------------------
> Jean-Eric Cuendet
> Linkvest SA
> Av des Baumettes 19, 1020 Renens Switzerland
> Tel +41 21 632 9043  Fax +41 21 632 9090 
> http://www.linkvest.com  E-mail: 
> jean-eric.cuendet at linkvest.com
> ---------------------------------------------------
> 
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: mail.txt
URL: <http://listman.redhat.com/archives/linux-lvm/attachments/20010827/80155f4e/attachment.txt>