[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Re: [linux-lvm] What have I done!?



On Wed, Oct 03, 2001 at 10:54:21PM -0400, Jason A. Lixfeld wrote:

> hdj: read_intr: error=0x04 { DriveStatusError }
> hdj: read_intr: status=0x59 { DriveReady SeekComplete DataRequest Error }
> hdj: read_intr: error=0x04 { DriveStatusError }
> hdj: read_intr: status=0x59 { DriveReady SeekComplete DataRequest Error }
> hdl: read_intr: error=0x04 { DriveStatusError }
> hdl: read_intr: status=0x59 { DriveReady SeekComplete DataRequest Error }
> hdl: read_intr: error=0x04 { DriveStatusError }
> hdl: read_intr: status=0x59 { DriveReady SeekComplete DataRequest Error }

Those are IDE driver errors.  Judging from the drive devices, you
have quite a few ide controllers.  Did you compile in the drivers
for all of them?  Some of the cards (and even some on-board chipsets)
are NOT supported by default.  In particular, Promise & HiPoint
cards require special kernel compile time options.

What do you see in /proc/ide?

Note that if you compiled the drivers as modules, those modules
MUST be loaded BEFORE lvm is started.

  Michael Kellen
  $ fortune -m Kellen



[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]