[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Re: [linux-lvm] What have I done!?



---------- Original Message ----------------------------------
From: idsfa visi com
Reply-To: linux-lvm sistina com
Date:  Thu, 4 Oct 2001 00:44:25 -0500

>On Wed, Oct 03, 2001 at 10:54:21PM -0400, Jason A. Lixfeld wrote:
>
>> hdj: read_intr: error=0x04 { DriveStatusError }
>> hdj: read_intr: status=0x59 { DriveReady SeekComplete DataRequest Error }
>> hdj: read_intr: error=0x04 { DriveStatusError }
>> hdj: read_intr: status=0x59 { DriveReady SeekComplete DataRequest Error }
>> hdl: read_intr: error=0x04 { DriveStatusError }
>> hdl: read_intr: status=0x59 { DriveReady SeekComplete DataRequest Error }
>> hdl: read_intr: error=0x04 { DriveStatusError }
>> hdl: read_intr: status=0x59 { DriveReady SeekComplete DataRequest Error }
>
>Those are IDE driver errors.  Judging from the drive devices, you
>have quite a few ide controllers.  Did you compile in the drivers
>for all of them?  Some of the cards (and even some on-board chipsets)
>are NOT supported by default.  In particular, Promise & HiPoint
>cards require special kernel compile time options.
>
>What do you see in /proc/ide?
>
>Note that if you compiled the drivers as modules, those modules
>MUST be loaded BEFORE lvm is started.
>
>  Michael Kellen
>  $ fortune -m Kellen
>
>_______________________________________________
>linux-lvm mailing list
>linux-lvm sistina com
>http://lists.sistina.com/mailman/listinfo/linux-lvm
>read the LVM HOW-TO at http://www.sistina.com/lvm/Pages/howto.html
>

So far I have no problems with Promise & HiPoint kernel drivers. Please indicate your chipset, cpu and all compiled ide drivers. This will help to see a pattern here.

-Tim.



[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]