[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

RE: [linux-lvm] What have I done!?



Hi Michael,

	All of the cards are Promise cards.  One is a FastTrack100 TX2
and two others are Promise Ultra100s:

  Bus  0, device   8, function  0:
    RAID bus controller: PCI device 105a:6268 (Promise Technology, Inc.)
(rev 1).
      IRQ 15.
      Master Capable.  Latency=64.  Min Gnt=4.Max Lat=18.
      I/O at 0xa400 [0xa407].
      I/O at 0xa800 [0xa803].
      I/O at 0xac00 [0xac07].
      I/O at 0xb000 [0xb003].
      I/O at 0xb400 [0xb40f].
      Non-prefetchable 32 bit memory at 0xec040000 [0xec04ffff].
  Bus  0, device   9, function  0:
    Unknown mass storage controller: Promise Technology, Inc. 20267 (rev
2).
      IRQ 10.
      Master Capable.  Latency=64.  
      I/O at 0xc000 [0xc007].
      I/O at 0xc400 [0xc403].
      I/O at 0xb800 [0xb807].
      I/O at 0xbc00 [0xbc03].
      I/O at 0xc800 [0xc83f].
      Non-prefetchable 32 bit memory at 0xec020000 [0xec03ffff].
  Bus  0, device  10, function  0:
    Unknown mass storage controller: Promise Technology, Inc. 20267 (#2)
(rev 2).
      IRQ 12.
      Master Capable.  Latency=64.  
      I/O at 0xd400 [0xd407].
      I/O at 0xd800 [0xd803].
      I/O at 0xcc00 [0xcc07].
      I/O at 0xd000 [0xd003].
      I/O at 0xdc00 [0xdc3f].
      Non-prefetchable 32 bit memory at 0xec000000 [0xec01ffff].

# cat /usr/src/linux/.config
...
CONFIG_BLK_DEV_IDE=y
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
CONFIG_BLK_DEV_IDECD=y
CONFIG_BLK_DEV_CMD640=y
CONFIG_BLK_DEV_RZ1000=y
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
CONFIG_BLK_DEV_IDEDMA_PCI=y
CONFIG_BLK_DEV_ADMA=y
CONFIG_IDEDMA_PCI_AUTO=y
CONFIG_BLK_DEV_IDEDMA=y
CONFIG_BLK_DEV_PIIX=y
CONFIG_PIIX_TUNING=y
CONFIG_BLK_DEV_PDC202XX=y
CONFIG_PDC202XX_BURST=y
CONFIG_PDC202XX_FORCE=y
CONFIG_IDEDMA_AUTO=y
CONFIG_BLK_DEV_IDE_MODES=y
CONFIG_BLK_DEV_ATARAID=y
CONFIG_BLK_DEV_ATARAID_PDC=y
...

Everything is compiled right into the kernel, no modules.

$ ls -al /proc/ide/
total 0
dr-xr-xr-x    8 root     root            0 Oct  4 06:58 .
dr-xr-xr-x   47 root     root            0 Oct  3 17:12 ..
-r--r--r--    1 root     root            0 Oct  4 06:58 drivers
lrwxrwxrwx    1 root     root            8 Oct  4 06:58 hda -> ide0/hda
lrwxrwxrwx    1 root     root            8 Oct  4 06:58 hde -> ide2/hde
lrwxrwxrwx    1 root     root            8 Oct  4 06:58 hdf -> ide2/hdf
lrwxrwxrwx    1 root     root            8 Oct  4 06:58 hdg -> ide3/hdg
lrwxrwxrwx    1 root     root            8 Oct  4 06:58 hdh -> ide3/hdh
lrwxrwxrwx    1 root     root            8 Oct  4 06:58 hdi -> ide4/hdi
lrwxrwxrwx    1 root     root            8 Oct  4 06:58 hdj -> ide4/hdj
lrwxrwxrwx    1 root     root            8 Oct  4 06:58 hdk -> ide5/hdk
lrwxrwxrwx    1 root     root            8 Oct  4 06:58 hdl -> ide5/hdl
lrwxrwxrwx    1 root     root            8 Oct  4 06:58 hdm -> ide6/hdm
lrwxrwxrwx    1 root     root            8 Oct  4 06:58 hdn -> ide6/hdn
dr-xr-xr-x    3 root     root            0 Oct  4 06:58 ide0
dr-xr-xr-x    4 root     root            0 Oct  4 06:58 ide2
dr-xr-xr-x    4 root     root            0 Oct  4 06:58 ide3
dr-xr-xr-x    4 root     root            0 Oct  4 06:58 ide4
dr-xr-xr-x    4 root     root            0 Oct  4 06:58 ide5
dr-xr-xr-x    4 root     root            0 Oct  4 06:58 ide6
-r--r--r--    1 root     root            0 Oct  4 06:58 pdc202xx
-r--r--r--    1 root     root            0 Oct  4 06:58 piix
$

> -----Original Message-----
> From: linux-lvm-admin sistina com 
> [mailto:linux-lvm-admin sistina com] On Behalf Of idsfa visi com
> Sent: October 4, 2001 1:44 AM
> To: linux-lvm sistina com
> Subject: Re: [linux-lvm] What have I done!?
> 
> 
> 
> On Wed, Oct 03, 2001 at 10:54:21PM -0400, Jason A. Lixfeld wrote:
> 
> > hdj: read_intr: error=0x04 { DriveStatusError }
> > hdj: read_intr: status=0x59 { DriveReady SeekComplete DataRequest 
> > Error }
> > hdj: read_intr: error=0x04 { DriveStatusError }
> > hdj: read_intr: status=0x59 { DriveReady SeekComplete 
> DataRequest Error }
> > hdl: read_intr: error=0x04 { DriveStatusError }
> > hdl: read_intr: status=0x59 { DriveReady SeekComplete 
> DataRequest Error }
> > hdl: read_intr: error=0x04 { DriveStatusError }
> > hdl: read_intr: status=0x59 { DriveReady SeekComplete 
> DataRequest Error }
> 
> Those are IDE driver errors.  Judging from the drive devices, 
> you have quite a few ide controllers.  Did you compile in the 
> drivers for all of them?  Some of the cards (and even some 
> on-board chipsets) are NOT supported by default.  In 
> particular, Promise & HiPoint cards require special kernel 
> compile time options.
> 
> What do you see in /proc/ide?
> 
> Note that if you compiled the drivers as modules, those 
> modules MUST be loaded BEFORE lvm is started.
> 
>   Michael Kellen
>   $ fortune -m Kellen
> 
> _______________________________________________
> linux-lvm mailing list
> linux-lvm sistina com 
> http://lists.sistina.com/mailman/listinfo/linu> x-lvm
> read the 
> LVM HOW-TO at 
> http://www.sistina.com/lvm/Pages/howto.html
> 




[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]