[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

[linux-lvm] PV-Move fails, now at 127 Pe's...



Hi,

So, I've updated my lvm tools from 0.9.1-beta2 to 1.0.3., and now I seem to
have ran into quite some problems..

Ran all test of the move again, and after a few faultless flows I started
off again..
We have a volume with 4 * 60, 2 * 80 disk, and another volume (new one, new
disk) with 120Gb.

I'd like to move one 60Gb disk to the volume with the 120 Gb disk.

E2fsran nicely, then I started with a PV move, to get /dev/hdc1 out (after
failing the first time I tries also to move /dev/hdb1 out) both failing at
the same point, that is with 127 PE's moved...

Any takers ?

Regards,
------- info-----------
pvmove -- writing physical extent part of VGDA on destination "/dev/hdg1"
lv: /dev/volume/data[1]  old_dev: 22:01  new_dev: 34:01  old_pe_sector:
4176642  new_pe_sector: 47036865
pvmove -- opening output physical volume "/dev/hdg1"
pvmove -- llseeking input physical volume "/dev/hdc1"
pvmove -- llseeking output physical volume "/dev/hdg1"
pvmove -- /dev/hdc1 [PE 127 [data [LE 7328]] -> /dev/hdg1 [PE 1435]
[128/3577]
pvmove -- locking physical extent 127 of "/dev/hdc1" in kernel
pvmove -- about to read input physical volume "/dev/hdc1" and to write
output physical volume "/dev/hdg1"
pvmove -- ERROR reading input physical volume "/dev/hdc1" (still 7733248
bytes to read)
pvmove -- ERROR "pv_move_pe(): read input PV" moving physical extents

[root localhost /]# lvscan
lvscan -- ERROR: VGDA in kernel and lvmtab are NOT consistent; please run
vgscan

[root localhost /]# vgscan
vgscan -- reading all physical volumes (this may take a while...)
vgscan -- found active volume group "volume"
vgscan -- only found 20391 of 20518 LEs for LV /dev/volume/data (0)
vgscan -- ERROR "vg_read_with_pv_and_lv(): allocated LE of LV" can't get
data of volume group "volume" from physical volume(s)
vgscan -- found active volume group "mp3volume"
vgscan -- "/etc/lvmtab" and "/etc/lvmtab.d" successfully created
vgscan -- WARNING: This program does not do a VGDA backup of your volume
groups

[root localhost /]# lvscan
lvscan -- ERROR: VGDA in kernel and lvmtab are NOT consistent; please run
vgscan

[root localhost /]# vgdisplay
vgdisplay -- ERROR: VGDA in kernel and lvmtab are NOT consistent; please run
vgscan

[root localhost /]# vgdisplay -v volume
vgdisplay -- ERROR: VGDA in kernel and lvmtab are NOT consistent; please run
vgscan





[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]