[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Re: [linux-lvm] PV-Move fails, now at 127 Pe's...



Hi,

So now the volume is inactive, I can't change it, although it notices 
there is an inactive volume on the disks...

hdb1 and hdc1 both have 127 blocks on there now, and hdg1 has 2*127 block 
removed. I can't access the data anymore now... Any suggestions on how to 
get the volume back online, so the data can be accessed ???

-------------
vgscan -- only found 20391 of 20518 LEs for LV /dev/volume/data (0)
vgscan -- ERROR "vg_read_with_pv_and_lv(): allocated LE of LV" can't 
get data of volume group "volume" from physical volume(s)
-------------

Denie


On Wed, 6 Mar 2002, Heinz J . Mauelshagen wrote:

> 
> Well, you hit the cast problem I reported a fix for on linux-lvm shortly
> after the LVM 1.0.3 release.
> 
> Sorry for the inconvenience!
> 
> Here's the patch again.
> 
> Regards,
> Heinz    -- The LVM Guy --
> 
> On Wed, Mar 06, 2002 at 01:05:53AM +0100, Denie Andriessen wrote:
> > Hi,
> > 
> > So, I've updated my lvm tools from 0.9.1-beta2 to 1.0.3., and now I seem to
> > have ran into quite some problems..
> > 
> > Ran all test of the move again, and after a few faultless flows I started
> > off again..
> > We have a volume with 4 * 60, 2 * 80 disk, and another volume (new one, new
> > disk) with 120Gb.
> > 
> > I'd like to move one 60Gb disk to the volume with the 120 Gb disk.
> > 
> > E2fsran nicely, then I started with a PV move, to get /dev/hdc1 out (after
> > failing the first time I tries also to move /dev/hdb1 out) both failing at
> > the same point, that is with 127 PE's moved...
> > 
> > Any takers ?
> > 
> > Regards,
> > ------- info-----------
> > pvmove -- writing physical extent part of VGDA on destination "/dev/hdg1"
> > lv: /dev/volume/data[1]  old_dev: 22:01  new_dev: 34:01  old_pe_sector:
> > 4176642  new_pe_sector: 47036865
> > pvmove -- opening output physical volume "/dev/hdg1"
> > pvmove -- llseeking input physical volume "/dev/hdc1"
> > pvmove -- llseeking output physical volume "/dev/hdg1"
> > pvmove -- /dev/hdc1 [PE 127 [data [LE 7328]] -> /dev/hdg1 [PE 1435]
> > [128/3577]
> > pvmove -- locking physical extent 127 of "/dev/hdc1" in kernel
> > pvmove -- about to read input physical volume "/dev/hdc1" and to write
> > output physical volume "/dev/hdg1"
> > pvmove -- ERROR reading input physical volume "/dev/hdc1" (still 7733248
> > bytes to read)
> > pvmove -- ERROR "pv_move_pe(): read input PV" moving physical extents
> > 
> > [root localhost /]# lvscan
> > lvscan -- ERROR: VGDA in kernel and lvmtab are NOT consistent; please run
> > vgscan
> > 
> > [root localhost /]# vgscan
> > vgscan -- reading all physical volumes (this may take a while...)
> > vgscan -- found active volume group "volume"
> > vgscan -- only found 20391 of 20518 LEs for LV /dev/volume/data (0)
> > vgscan -- ERROR "vg_read_with_pv_and_lv(): allocated LE of LV" can't get
> > data of volume group "volume" from physical volume(s)
> > vgscan -- found active volume group "mp3volume"
> > vgscan -- "/etc/lvmtab" and "/etc/lvmtab.d" successfully created
> > vgscan -- WARNING: This program does not do a VGDA backup of your volume
> > groups
> > 
> > [root localhost /]# lvscan
> > lvscan -- ERROR: VGDA in kernel and lvmtab are NOT consistent; please run
> > vgscan
> > 
> > [root localhost /]# vgdisplay
> > vgdisplay -- ERROR: VGDA in kernel and lvmtab are NOT consistent; please run
> > vgscan
> > 
> > [root localhost /]# vgdisplay -v volume
> > vgdisplay -- ERROR: VGDA in kernel and lvmtab are NOT consistent; please run
> > vgscan
> > 
> > 
> > 
> > _______________________________________________
> > linux-lvm mailing list
> > linux-lvm sistina com
> > http://lists.sistina.com/mailman/listinfo/linux-lvm
> > read the LVM HOW-TO at http://www.sistina.com/lvm/Pages/howto.html
> 
> *** Software bugs are stupid.
>     Nevertheless it needs not so stupid people to solve them ***
> 
> =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
> 
> Heinz Mauelshagen                                 Sistina Software Inc.
> Senior Consultant/Developer                       Am Sonnenhang 11
>                                                   56242 Marienrachdorf
>                                                   Germany
> Mauelshagen Sistina com                           +49 2626 141200
>                                                        FAX 924446
> =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
> 
> _______________________________________________
> linux-lvm mailing list
> linux-lvm sistina com
> http://lists.sistina.com/mailman/listinfo/linux-lvm
> read the LVM HOW-TO at http://www.sistina.com/lvm/Pages/howto.html
> 

-- 




----- geekcode sig file -----
GCM/GCS/GS d- s: a C++$ U+++$ P+++$ L++$ E- W+++$ N++ u K w++ O M
V PS PE++ Y+ PGP t+ 5 X++ R tv- b++ DI++ D+ G e+++ h-- r+>++ y++
-----------------------------






[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]