[linux-lvm] mdraid, pvcreate and vgcreate problem

[raoul bhatia]

ok, i found the problem. i'm mixed using devfsd, and somehow, i forgot
that you have to use /dev/md/1 instead of /dev/md1 when working with
lvm. so i have to say sorry for my last email!

best regards,
raoul bhatia

raoul bhatia wrote:

> hi!
> 
> i've ran into some problems with mdraid and lvm. as i guess that log 
> messages will give you more information than i might do, i will begin:
> 
> i've got an identical setup on another server, which works flawlessly. 
> as i don't know, where these problems might originate from, i hope that 
> you can help me!
> 
> best regards,
> raoul bhatia
> 
> yellow:~# cat /proc/mdstat
> Personalities : [linear] [raid0] [raid1] [raid5]
> read_ahead 1024 sectors
> md3 : active raid1 ide/host0/bus1/target0/lun0/part3[1] 
> ide/host0/bus0/target0/lun0/part3[0]
>       489856 blocks [2/2] [UU]
> 
> md0 : active raid1 ide/host0/bus1/target0/lun0/part5[1] 
> ide/host0/bus0/target0/lun0/part5[0]
>       979840 blocks [2/2] [UU]
> 
> md1 : active raid1 ide/host0/bus1/target0/lun0/part6[1] 
> ide/host0/bus0/target0/lun0/part6[0]
>       37069888 blocks [2/2] [UU]
> 
> unused devices: <none>
> 
> yellow:~# pvcreate -v /dev/md1
> pvcreate -- locking logical volume manager
> pvcreate -- checking physical volume name "/dev/md1"
> pvcreate -- getting physical volume size
> pvcreate -- checking maximum physical volume size
> pvcreate -- checking partition type
> pvcreate -- creating new physical volume
> pvcreate -- setting up physical volume for /dev/md1 with 74139776 sectors
> pvcreate -- writing physical volume data to disk "/dev/md1"
> pvcreate -- physical volume "/dev/md1" successfully created
> pvcreate -- unlocking logical volume manager
> 
> yellow:~# pvdisplay /dev/md1
> pvdisplay -- "/dev/md1" is a new physical volume of 35.35 GB
> 
> yellow:~# pvdata -v /dev/md1
> --- NEW Physical volume ---
> PV Name               /dev/md1
> VG Name
> PV Size               35.35 GB [74139776 secs]
> PV#                   0
> PV Status             NOT available
> Allocatable           NO
> Cur LV                0
> PE Size (KByte)       0
> Total PE              0
> Free PE               0
> Allocated PE          0
> PV UUID               FzRQMD-gyz0-xB06-iP2s-Pog2-4MtC-lYSuab
> 
> yellow:~# vgcreate -v vg0 /dev/md1
> vgcreate -- checking volume group name
> vgcreate -- checking volume group directory existence
> vgcreate -- locking logical volume manager
> vgcreate -- checking volume group "vg0" existence
> vgcreate -- counting all existing volume groups
> vgcreate -- reading all physical volume data from disks
> vgcreate -- checking if all given physical volumes in command line are new
> vgcreate -- checking physical volumes name "/dev/md1"
> vgcreate -- no valid physical volumes in command line
-- 
____________________________________________________________________
raoul bhatia                              email.    r.bhatia at ipax.tk
- ipax.tk -                               web.    http://www.ipax.tk
chief technician, support                 irc.      #ipax (quakenet)
____________________________________________________________________