[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Re: [linux-lvm] vgscan & CDROM



Hi Luca

I tried your idea:


grep cdrom /etc/lvm/lvm.conf
     filter = [ "r|/dev/hdb|", "r|/dev/hdc|", "r|/dev/cdrom|" ]

vgscan -v -v 2>&1 | grep cdrom

      /dev/cdrom1: size is 31244 sectors
  /dev/cdrom1: read failed after 0 of 2048 at 0: Input/output error
      /dev/cdrom1: size is 31244 sectors
      /dev/cdrom1: No label detected
      /dev/cdrom: size is 4 sectors

Regards,
Chris

On Sun, Aug 28, 2005 at 08:36:14PM +0200, Luca Berra wrote:
> On Sun, Aug 28, 2005 at 01:56:18PM +0200, Chris Osicki wrote:
> >OK, that are my filters now:
> >
> >   filter = [ "r|/dev/hdb|" ]
> >   filter = [ "r|/dev/hdc|" ]
> >   filter = [ "r|/dev/cdrom|" ]
> >   filter = [ "r|/dev/cdrom1|" ]
> >   filter = [ "r|/dev/cdrom*|" ]
> >   filter = [ "r|/dev/cdrom.*|" ]
> >
> i tought the syntax was:
> filter = [ "r|/dev/hdb|", "r|/dev/hdc|", "r|/dev/cdrom|" ]
> 
> you should not need the last 3, since "r|/dev/cdrom|" being a regexp
> matches all of them.
> 
> 
> btw, i believed "sysfs_scan = 1" was enough to skip cdroms
> 
> L.
> 
> 
> 
> 
> -- 
> Luca Berra -- bluca comedia it
>        Communication Media & Services S.r.l.
> /"\
> \ /     ASCII RIBBON CAMPAIGN
>  X        AGAINST HTML MAIL
> / \
> 
> _______________________________________________
> linux-lvm mailing list
> linux-lvm redhat com
> https://www.redhat.com/mailman/listinfo/linux-lvm
> read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/

-- 

Chris Osicki osk osk ch
Dipl. Informatik-Ing. HTL


[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]