[linux-lvm] Re: piranha on Fedora core 6, piranha-gui fails, pulse running_real servers not switching
Anuj Singh
anujhere at gmail.com
Sat Apr 7 22:21:22 UTC 2007
Hello,
it is working now, one of my real server had some routing problem, i
changed it, now only problem remaining is to read load as nanny is
still showing the same error ,
Thank and regards
anugunj "anuj"
Apr 7 21:51:48 pr0032 nanny[7703]: failed to read remote load
Apr 7 21:52:08 pr0032 nanny[7703]: The following exited abnormally:
Apr 7 21:52:08 pr0032 nanny[7703]: failed to read remote load
Apr 7 21:52:28 pr0032 nanny[7703]: The following exited abnormally:
What am i missing here? Is it necessary to use piranha-gui to
On 4/7/07, Anuj Singh <anujhere at gmail.com> wrote:
> Hi ,
> I am configuring lvs nat router with piranha-0.7.12-1 on Fedora Core 6 machines
> When i turn off service of one of my real service it is not switching
> to second real server. I can access and see logs of connection in
> ipvsadm -L.
> I edited sample.cf file and copied as lvs.cf. as my piranha-gui is not
> running due to some missing appache modules.
>
> Director Master lvs machine
> eth0=10.1.1.1
> eth1=192.168.10.42
>
> routing table without running pulse service
> Kernel IP routing table
> Destination Gateway Genmask Flags Metric Ref Use Iface
> 192.168.10.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1
> 10.1.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0
> 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth1
>
> routing table after starting pulse service
> Kernel IP routing table
> Destination Gateway Genmask Flags Metric Ref Use Iface
> 192.168.10.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1
> 10.1.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0
> 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth1
> 10.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0 eth0
>
> ipvsadm -L
> IP Virtual Server version 1.2.1 (size=4096)
> Prot LocalAddress:Port Scheduler Flags
> -> RemoteAddress:Port Forward Weight ActiveConn InActConn
> TCP 10.1.1.22:ftp wlc
> TCP 10.1.1.21:http rr persistent 60
> -> node31.prolog.com:http Masq 2 0 0
>
>
> Slave backupp lvs machine
> eth0=10.1.12
> eth1=192.168.10.55
>
> Test client machine IP = 10.1.1.11
>
> my lvs.cf
>
> service = lvs
> primary = 192.168.10.42
> backup = 192.168.10.55
> backup_active = 1
> heartbeat = 1
> heartbeat_port = 1050
> keepalive = 6
> deadtime = 18
> network = nat
> nat_router = 192.168.10.111 eth1:1
> virtual server1 {
> address = 10.1.1.21 eth0:1
> active = 1
> load_monitor = uptime
> timeout = 5
> reentry = 10
> port = http
> send = "GET / HTTP/1.0\r\n\r\n"
> expect = "HTTP"
> scheduler = rr
> persistent = 60
> pmask = 255.255.255.255
> protocol = tcp
> server Real1 {
> address = 192.168.10.31
> active = 1
> weight = 2
> }
> server Real2 {
> address = 192.168.10.83
> active = 1
> weight = 1
> }
> }
> virtual server2 {
> address = 10.1.1.22 eth0:2
> active = 1
> load_monitor = uptime
> timeout = 5
> reentry = 10
> port = 21
> send = "\n"
> server Real1 {
> address = 192.168.10.83
> active = 1
> }
> server Real2 {
> address = 192.168.10.3
> active = 1
> }
> }
>
>
> Logs:
> Apr 7 21:50:45 pr0032 pulse[7695]: STARTING PULSE AS MASTER
> Apr 7 21:51:03 pr0032 pulse[7695]: partner dead: activating lvs
> Apr 7 21:51:03 pr0032 lvs[7697]: starting virtual service server1 active: 80
> Apr 7 21:51:03 pr0032 nanny[7703]: starting LVS client monitor for 10.1.1.21:80
> Apr 7 21:51:03 pr0032 lvs[7697]: create_monitor for server1/Real1
> running as pid 7703
> Apr 7 21:51:03 pr0032 nanny[7704]: starting LVS client monitor for 10.1.1.21:80
> Apr 7 21:51:03 pr0032 lvs[7697]: create_monitor for server1/Real2
> running as pid 7704
> Apr 7 21:51:03 pr0032 lvs[7697]: starting virtual service server2 active: 21
> Apr 7 21:51:03 pr0032 nanny[7706]: starting LVS client monitor for 10.1.1.22:21
> Apr 7 21:51:03 pr0032 lvs[7697]: create_monitor for server2/Real1
> running as pid 7706
> Apr 7 21:51:03 pr0032 nanny[7707]: starting LVS client monitor for 10.1.1.22:21
> Apr 7 21:51:03 pr0032 lvs[7697]: create_monitor for server2/Real2
> running as pid 7707
> Apr 7 21:51:03 pr0032 avahi-daemon[4317]: Registering new address
> record for 10.1.1.21 on eth0.
> Apr 7 21:51:03 pr0032 avahi-daemon[4317]: Registering new address
> record for 10.1.1.22 on eth0.
> Apr 7 21:51:03 pr0032 nanny[7703]: making 192.168.10.31:80 available
> Apr 7 21:51:03 pr0032 avahi-daemon[4317]: Registering new address
> record for 192.168.10.111 on eth1.
> Apr 7 21:51:08 pr0032 pulse[7700]: gratuitous lvs arps finished
> Apr 7 21:51:28 pr0032 nanny[7703]: The following exited abnormally:
> Apr 7 21:51:28 pr0032 nanny[7703]: failed to read remote load
> Apr 7 21:51:08 pr0032 pulse[7700]: gratuitous lvs arps finished
> Apr 7 21:51:28 pr0032 nanny[7703]: The following exited abnormally:
> Apr 7 21:51:28 pr0032 nanny[7703]: failed to read remote load
> Apr 7 21:51:48 pr0032 nanny[7703]: The following exited abnormally:
> Apr 7 21:51:48 pr0032 nanny[7703]: failed to read remote load
> Apr 7 21:52:08 pr0032 nanny[7703]: The following exited abnormally:
> Apr 7 21:52:08 pr0032 nanny[7703]: failed to read remote load
> Apr 7 21:52:28 pr0032 nanny[7703]: The following exited abnormally:
>
> What am i missing here? Is it necessary to use piranha-gui to
> configure pulse? I am using Fedora core 6.
> When I switch off one of my real server it is not switching to real
> server2. My logs showing errors in nanny for reading load. Do i need
> to make some changes on my real servers?
>
> Thanks and regards
> Anuj Singh
>
More information about the linux-lvm
mailing list