[linux-lvm] poor read performance on rbd+LVM, LVM overload
Mike Snitzer
snitzer at redhat.com
Mon Oct 21 17:48:51 UTC 2013
On Mon, Oct 21 2013 at 12:02pm -0400,
Sage Weil <sage at inktank.com> wrote:
> On Mon, 21 Oct 2013, Mike Snitzer wrote:
> > On Mon, Oct 21 2013 at 10:11am -0400,
> > Christoph Hellwig <hch at infradead.org> wrote:
> >
> > > On Sun, Oct 20, 2013 at 08:58:58PM -0700, Sage Weil wrote:
> > > > It looks like without LVM we're getting 128KB requests (which IIRC is
> > > > typical), but with LVM it's only 4KB. Unfortunately my memory is a bit
> > > > fuzzy here, but I seem to recall a property on the request_queue or device
> > > > that affected this. RBD is currently doing
> > >
> > > Unfortunately most device mapper modules still split all I/O into 4k
> > > chunks before handling them. They rely on the elevator to merge them
> > > back together down the line, which isn't overly efficient but should at
> > > least provide larger segments for the common cases.
> >
> > It isn't DM that splits the IO into 4K chunks; it is the VM subsystem
> > no? Unless care is taken to assemble larger bios (higher up the IO
> > stack, e.g. in XFS), all buffered IO will come to bio-based DM targets
> > in $PAGE_SIZE granularity.
> >
> > I would expect direct IO to before better here because it will make use
> > of bio_add_page to build up larger IOs.
>
> I do know that we regularly see 128 KB requests when we put XFS (or
> whatever else) directly on top of /dev/rbd*.
Should be pretty straight-forward to identify any limits that are
different by walking sysfs/queue, e.g.:
grep -r . /sys/block/rdbXXX/queue
vs
grep -r . /sys/block/dm-X/queue
Could be there is an unexpected difference. For instance, there was
this fix recently: http://patchwork.usersys.redhat.com/patch/69661/
> > Taking a step back, the rbd driver is exposing both the minimum_io_size
> > and optimal_io_size as 4M. This symmetry will cause XFS to _not_ detect
> > the exposed limits as striping. Therefore, AFAIK, XFS won't take steps
> > to respect the limits when it assembles its bios (via bio_add_page).
> >
> > Sage, any reason why you don't use traditional raid geomtry based IO
> > limits?, e.g.:
> >
> > minimum_io_size = raid chunk size
> > optimal_io_size = raid chunk size * N stripes (aka full stripe)
>
> We are... by default we stripe 4M chunks across 4M objects. You're
> suggesting it would actually help to advertise a smaller minimim_io_size
> (say, 1MB)? This could easily be made tunable.
You're striping 4MB chunks across 4 million stripes?
So the full stripe size in bytes is 17592186044416 (or 16TB)? Yeah
cannot see how XFS could make use of that ;)
More information about the linux-lvm
mailing list