[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

[lvm-devel] [PATCH] Calculate mirror log size instead of hardcoding 1 extent size.



Calculate mirror log size instead of hardcoding 1 extent size.

It fails for 1k PE now.

Patch adds log_region_size into allocation habdle struct
and use it in _alloc_parallel_area() for proper log size calculation
instead of hardcoded 1 extent - which can fail.

Reproducer for incorrect log size calculation:
	DEV=/dev/sd[bcd]

	pvcreate $DEV
	vgcreate -s 1k vg_test $DEV
	lvcreate -m1 -L 12M -n mirr vg_test

https://bugzilla.redhat.com/show_bug.cgi?id=477040

(note that without kernel patch from -mm for log size check 
it will freeze - see bz https://bugzilla.redhat.com/show_bug.cgi?id=471565)

The log size calculation is mostly copied from kernel code.

The change in  _for_each_pv() is tricky, we have no region_size information
there, but log_lv should be already configured - so it can use le_count.
(I am not sue if this code is correct anyway, but cannot found
path where it is wrong.)
 
Signed-off-by: Milan Broz <mbroz redhat com>
---
 lib/metadata/lv_alloc.h |    2 +-
 lib/metadata/lv_manip.c |   37 ++++++++++++++++++++++++++++++++-----
 lib/metadata/metadata.h |   13 ++++++++++++-
 lib/metadata/mirror.c   |    6 +++---
 4 files changed, 48 insertions(+), 10 deletions(-)

Index: LVM2/lib/metadata/metadata.h
===================================================================
--- LVM2.orig/lib/metadata/metadata.h	2008-12-09 12:00:32.000000000 +0100
+++ LVM2/lib/metadata/metadata.h	2008-12-19 09:53:05.000000000 +0100
@@ -34,7 +34,18 @@
 //#define STRIPE_SIZE_LIMIT ((UINT_MAX >> 2) + 1)
 //#define PV_MIN_SIZE ( 512L * 1024L >> SECTOR_SHIFT)	/* 512 KB in sectors */
 //#define MAX_RESTRICTED_LVS 255	/* Used by FMT_RESTRICTED_LVIDS */
-#define MIRROR_LOG_SIZE 1	/* Extents */
+#define MIRROR_LOG_OFFSET	2	/* sectors */
+
+/*
+ * Ceiling(n / sz)
+ */
+#define dm_div_up(n, sz) (((n) + (sz) - 1) / (sz))
+
+/*
+ * Ceiling(n / size) * size
+ */
+#define dm_round_up(n, sz) (dm_div_up((n), (sz)) * (sz))
+
 
 /* Various flags */
 /* Note that the bits no longer necessarily correspond to LVM1 disk format */
Index: LVM2/lib/metadata/lv_manip.c
===================================================================
--- LVM2.orig/lib/metadata/lv_manip.c	2008-12-09 12:00:32.000000000 +0100
+++ LVM2/lib/metadata/lv_manip.c	2008-12-19 12:00:05.000000000 +0100
@@ -516,6 +516,7 @@ struct alloc_handle {
 	uint32_t area_count;		/* Number of parallel areas */
 	uint32_t area_multiple;		/* seg->len = area_len * area_multiple */
 	uint32_t log_count;		/* Number of parallel 1-extent logs */
+	uint32_t log_region_size;	/* region size for log device */
 	uint32_t total_area_len;	/* Total number of parallel extents */
 
 	struct dm_list *parallel_areas;	/* PVs to avoid */
@@ -543,6 +544,7 @@ static struct alloc_handle *_alloc_init(
 					uint32_t mirrors,
 					uint32_t stripes,
 					uint32_t log_count,
+					uint32_t log_region_size,
 					struct dm_list *parallel_areas)
 {
 	struct alloc_handle *ah;
@@ -582,6 +584,7 @@ static struct alloc_handle *_alloc_init(
 
 	ah->area_count = area_count;
 	ah->log_count = log_count;
+	ah->log_region_size = log_region_size;
 	ah->alloc = alloc;
 	ah->area_multiple = calc_area_multiple(segtype, area_count);
 
@@ -704,6 +707,28 @@ static int _setup_alloced_segments(struc
 }
 
 /*
+ * Returns log device size in extents, algorithm from kernel code
+ */
+#define BYTE_SHIFT 3
+static uint32_t mirror_log_extents(uint32_t region_size, uint32_t pe_size, uint32_t area_len)
+{
+	size_t area_size, bitset_size, log_size, region_count;
+
+	area_size = area_len * pe_size;
+	region_count = dm_div_up(area_size, region_size);
+
+	/* Work out how many "unsigned long"s we need to hold the bitset. */
+	bitset_size = dm_round_up(region_count, sizeof(uint32_t) << BYTE_SHIFT);
+	bitset_size >>= BYTE_SHIFT;
+
+	/* Log device holds both header and bitset. */
+	log_size = dm_round_up((MIRROR_LOG_OFFSET << SECTOR_SHIFT) + bitset_size, 1 << SECTOR_SHIFT);
+	log_size >>= SECTOR_SHIFT;
+
+	return dm_div_up(log_size, pe_size);
+}
+
+/*
  * This function takes a list of pv_areas and adds them to allocated_areas.
  * If the complete area is not needed then it gets split.
  * The part used is removed from the pv_map so it can't be allocated twice.
@@ -745,7 +770,9 @@ static int _alloc_parallel_area(struct a
 	if (log_area) {
 		ah->log_area.pv = log_area->map->pv;
 		ah->log_area.pe = log_area->start;
-		ah->log_area.len = MIRROR_LOG_SIZE;	/* FIXME Calculate & check this */
+		ah->log_area.len = mirror_log_extents(ah->log_region_size,
+						      pv_pe_size(log_area->map->pv),
+						      area_len);
 		consume_pv_area(log_area, ah->log_area.len);
 	}
 
@@ -817,7 +844,7 @@ static int _for_each_pv(struct cmd_conte
 
 	/* FIXME only_single_area_segments used as workaround to skip log LV - needs new param? */
 	if (!only_single_area_segments && seg_is_mirrored(seg) && seg->log_lv) {
-		if (!(r = _for_each_pv(cmd, seg->log_lv, 0, MIRROR_LOG_SIZE,
+		if (!(r = _for_each_pv(cmd, seg->log_lv, 0, seg->log_lv->le_count?:1,
 				       NULL, 0, 0, 0, only_single_area_segments,
 				       fn, data)))
 			stack;
@@ -1256,7 +1283,7 @@ struct alloc_handle *allocate_extents(st
 				      const struct segment_type *segtype,
 				      uint32_t stripes,
 				      uint32_t mirrors, uint32_t log_count,
-				      uint32_t extents,
+				      uint32_t log_region_size, uint32_t extents,
 				      struct dm_list *allocatable_pvs,
 				      alloc_policy_t alloc,
 				      struct dm_list *parallel_areas)
@@ -1282,7 +1309,7 @@ struct alloc_handle *allocate_extents(st
 		alloc = vg->alloc;
 
 	if (!(ah = _alloc_init(vg->cmd, vg->cmd->mem, segtype, alloc, mirrors,
-			       stripes, log_count, parallel_areas)))
+			       stripes, log_count, log_region_size, parallel_areas)))
 		return_NULL;
 
 	if (!segtype_is_virtual(segtype) &&
@@ -1577,7 +1604,7 @@ int lv_extend(struct logical_volume *lv,
 	if (segtype_is_virtual(segtype))
 		return lv_add_virtual_segment(lv, status, extents, segtype);
 
-	if (!(ah = allocate_extents(lv->vg, lv, segtype, stripes, mirrors, 0,
+	if (!(ah = allocate_extents(lv->vg, lv, segtype, stripes, mirrors, 0, 0,
 				    extents, allocatable_pvs, alloc, NULL)))
 		return_0;
 
Index: LVM2/lib/metadata/lv_alloc.h
===================================================================
--- LVM2.orig/lib/metadata/lv_alloc.h	2008-12-18 22:55:22.000000000 +0100
+++ LVM2/lib/metadata/lv_alloc.h	2008-12-18 22:55:58.000000000 +0100
@@ -47,7 +47,7 @@ struct alloc_handle *allocate_extents(st
                                       const struct segment_type *segtype,
                                       uint32_t stripes,
                                       uint32_t mirrors, uint32_t log_count,
-				      uint32_t extents,
+				      uint32_t log_region_size, uint32_t extents,
                                       struct dm_list *allocatable_pvs,
 				      alloc_policy_t alloc,
 				      struct dm_list *parallel_areas);
Index: LVM2/lib/metadata/mirror.c
===================================================================
--- LVM2.orig/lib/metadata/mirror.c	2008-12-18 22:52:27.000000000 +0100
+++ LVM2/lib/metadata/mirror.c	2008-12-18 22:54:53.000000000 +0100
@@ -1171,7 +1171,7 @@ int add_mirrors_to_segments(struct cmd_c
 							   lv->le_count,
 							   region_size);
 
-	if (!(ah = allocate_extents(lv->vg, NULL, segtype, 1, mirrors, 0,
+	if (!(ah = allocate_extents(lv->vg, NULL, segtype, 1, mirrors, 0, 0,
 				    lv->le_count, allocatable_pvs, alloc,
 				    parallel_areas))) {
 		log_error("Unable to allocate mirror extents for %s.", lv->name);
@@ -1388,7 +1388,7 @@ int add_mirror_log(struct cmd_context *c
 
 	/* allocate destination extents */
 	ah = allocate_extents(lv->vg, NULL, segtype,
-			      0, 0, log_count, 0,
+			      0, 0, log_count, region_size, 0,
 			      allocatable_pvs, alloc, parallel_areas);
 	if (!ah) {
 		log_error("Unable to allocate extents for mirror log.");
@@ -1443,7 +1443,7 @@ int add_mirror_images(struct cmd_context
 		return_0;
 
 	ah = allocate_extents(lv->vg, NULL, segtype,
-			      stripes, mirrors, log_count, lv->le_count,
+			      stripes, mirrors, log_count, region_size, lv->le_count,
 			      allocatable_pvs, alloc, parallel_areas);
 	if (!ah) {
 		log_error("Unable to allocate extents for mirror(s).");



[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]