[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

[lvm-devel] LVM2 ./WHATS_NEW scripts/lvm2create_initrd/lvm ...



CVSROOT:	/cvs/lvm2
Module name:	LVM2
Changes by:	agk sourceware org	2011-11-12 17:03:54

Modified files:
	.              : WHATS_NEW 
	scripts/lvm2create_initrd: lvm2create_initrd lvm2create_initrd.8 
	                           lvm2create_initrd.pod 

Log message:
	Move gentoo MAKEDEV to /sbin in lvm2create_initrd. (James Le Cuirot)

Patches:
http://sourceware.org/cgi-bin/cvsweb.cgi/LVM2/WHATS_NEW.diff?cvsroot=lvm2&r1=1.2181&r2=1.2182
http://sourceware.org/cgi-bin/cvsweb.cgi/LVM2/scripts/lvm2create_initrd/lvm2create_initrd.diff?cvsroot=lvm2&r1=1.2&r2=1.3
http://sourceware.org/cgi-bin/cvsweb.cgi/LVM2/scripts/lvm2create_initrd/lvm2create_initrd.8.diff?cvsroot=lvm2&r1=1.1&r2=1.2
http://sourceware.org/cgi-bin/cvsweb.cgi/LVM2/scripts/lvm2create_initrd/lvm2create_initrd.pod.diff?cvsroot=lvm2&r1=1.1&r2=1.2

--- LVM2/WHATS_NEW	2011/11/11 15:11:08	1.2181
+++ LVM2/WHATS_NEW	2011/11/12 17:03:53	1.2182
@@ -1,5 +1,6 @@
 Version 2.02.89 - 
 ==================================
+  Move gentoo MAKEDEV to /sbin in lvm2create_initrd.
   Add filter to avoid scan of device if it is part of active multipath.
   Add missing default $LVM_VG_NAME usage for snapshots.
   Fix extent_count overflow with lvextend.
--- LVM2/scripts/lvm2create_initrd/lvm2create_initrd	2006/11/21 22:41:56	1.2
+++ LVM2/scripts/lvm2create_initrd/lvm2create_initrd	2011/11/12 17:03:54	1.3
@@ -48,7 +48,7 @@
 #    along with this program; if not, write to the Free Software
 #    Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
 #
-# $Id: lvm2create_initrd,v 1.2 2006/11/21 22:41:56 agk Exp $
+# $Id: lvm2create_initrd,v 1.3 2011/11/12 17:03:54 agk Exp $
 
 TMPMNT=/tmp/mnt.$$
 DEVRAM=/tmp/initrd.$$
@@ -74,7 +74,7 @@
 	echo "      -e|--extra     extra files to add to initrd"
 	echo "      -r|--raid      raid devices to start in initrd"
 	echo "      -R|--raidconf  location of mdadm.conf file to include"
-	echo "      -M|--makedev   set MAKEDEV type (debian or redhat)"
+	echo "      -M|--makedev   set MAKEDEV type (debian, redhat, gentoo)"
 }
 
 verbose () {
@@ -379,7 +379,7 @@
     RETCODE=$?
     ;;
 gentoo)
-    (cd $TMPMNT/dev; /usr/sbin/MAKEDEV $OPT_Q $BASICDEVICES $BLOCKDEVICES)
+    (cd $TMPMNT/dev; /sbin/MAKEDEV $OPT_Q $BASICDEVICES $BLOCKDEVICES)
     RETCODE=$?
     ;;
 *)
--- LVM2/scripts/lvm2create_initrd/lvm2create_initrd.8	2004/06/07 16:20:05	1.1
+++ LVM2/scripts/lvm2create_initrd/lvm2create_initrd.8	2011/11/12 17:03:54	1.2
@@ -1,15 +1,7 @@
-.\" Automatically generated by Pod::Man v1.37, Pod::Parser v1.14
+.\" Automatically generated by Pod::Man 2.23 (Pod::Simple 3.14)
 .\"
 .\" Standard preamble:
 .\" ========================================================================
-.de Sh \" Subsection heading
-.br
-.if t .Sp
-.ne 5
-.PP
-\fB\\$1\fR
-.PP
-..
 .de Sp \" Vertical space (when we can't use .PP)
 .if t .sp .5v
 .if n .sp
@@ -25,11 +17,11 @@
 ..
 .\" Set up some character translations and predefined strings.  \*(-- will
 .\" give an unbreakable dash, \*(PI will give pi, \*(L" will give a left
-.\" double quote, and \*(R" will give a right double quote.  | will give a
-.\" real vertical bar.  \*(C+ will give a nicer C++.  Capital omega is used to
-.\" do unbreakable dashes and therefore won't be available.  \*(C` and \*(C'
-.\" expand to `' in nroff, nothing in troff, for use with C<>.
-.tr \(*W-|\(bv\*(Tr
+.\" double quote, and \*(R" will give a right double quote.  \*(C+ will
+.\" give a nicer C++.  Capital omega is used to do unbreakable dashes and
+.\" therefore won't be available.  \*(C` and \*(C' expand to `' in nroff,
+.\" nothing in troff, for use with C<>.
+.tr \(*W-
 .ds C+ C\v'-.1v'\h'-1p'\s-2+\h'-1p'+\s0\v'.1v'\h'-1p'
 .ie n \{\
 .    ds -- \(*W-
@@ -48,22 +40,25 @@
 .    ds R" ''
 'br\}
 .\"
+.\" Escape single quotes in literal strings from groff's Unicode transform.
+.ie \n(.g .ds Aq \(aq
+.el       .ds Aq '
+.\"
 .\" If the F register is turned on, we'll generate index entries on stderr for
-.\" titles (.TH), headers (.SH), subsections (.Sh), items (.Ip), and index
+.\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index
 .\" entries marked with X<> in POD.  Of course, you'll have to process the
 .\" output yourself in some meaningful fashion.
-.if \nF \{\
+.ie \nF \{\
 .    de IX
 .    tm Index:\\$1\t\\n%\t"\\$2"
 ..
 .    nr % 0
 .    rr F
 .\}
-.\"
-.\" For nroff, turn off justification.  Always turn off hyphenation; it makes
-.\" way too many mistakes in technical documents.
-.hy 0
-.if n .na
+.el \{\
+.    de IX
+..
+.\}
 .\"
 .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2).
 .\" Fear.  Run.  Save yourself.  No user-serviceable parts.
@@ -129,7 +124,11 @@
 .\" ========================================================================
 .\"
 .IX Title "lvm2create_initrd 8"
-.TH lvm2create_initrd 8 "2004-06-05" "lvm2create_initrd" "create LVM2 initrd"
+.TH lvm2create_initrd 8 "2011-11-12" "lvm2create_initrd" "create LVM2 initrd"
+.\" For nroff, turn off justification.  Always turn off hyphenation; it makes
+.\" way too many mistakes in technical documents.
+.if n .ad l
+.nh
 .SH "NAME"
 lvm2create_initrd \- create initrd image for booting to root\e\-on\e\-LVM2
 .SH "SYNOPSIS"
@@ -145,10 +144,10 @@
 filesystem on a regular volume to act as a boot partition (typically mounted
 on /boot).
 .PP
-The resulting initrd image is fairly full\-featured. It can harbor and load
+The resulting initrd image is fairly full-featured. It can harbor and load
 kernel modules, start \s-1MD\s0 devices, and boot to a shell to perform rescue
 operations.
-.Sh "Booting to your initrd Image:"
+.SS "Booting to your initrd Image:"
 .IX Subsection "Booting to your initrd Image:"
 The filesystem image created is an ext2fs filesystem, hence your kernel must have
 ext2fs built into it statically in order to boot to the image.
@@ -189,7 +188,7 @@
 special device filters or other options you wish to use during the initrd
 stage. If this option is not
 included, then a lvm.conf file is created that contains only the current
-device filter from an \fBlvm dumpconfig\fR. This can also be set via the \fB$LVMCONF\fR
+device filter from an \fBlvm dumpconfig\fR. This can also be set via the \fB\f(CB$LVMCONF\fB\fR
 environment variable.
 .ie n .IP "\fB\-m|\-\-modules\fR ""\fI/path/to/module1.ko /path/to/module2.ko ...\fR""" 4
 .el .IP "\fB\-m|\-\-modules\fR ``\fI/path/to/module1.ko /path/to/module2.ko ...\fR''" 4
@@ -198,70 +197,80 @@
 takes a quoted, space-separated list of modules. Full pathnames are required.
 These modules are loaded into the kernel early in the initrd phase of the boot
 process. The current modprobe.conf file is also copied to the initrd image
-as well. This can also be specified via the \fB$MODULES\fR environment variable.
+as well. This can also be specified via the \fB\f(CB$MODULES\fB\fR environment variable.
 .ie n .IP "\fB\-e|\-\-extra\fR ""\fI/path/to/file1 /path/to/file2 ...\fR""" 4
 .el .IP "\fB\-e|\-\-extra\fR ``\fI/path/to/file1 /path/to/file2 ...\fR''" 4
 .IX Item "-e|--extra ""/path/to/file1 /path/to/file2 ..."""
 Extra files that should be included in the initrd image. These files will be
 copied to the same location in the initrd image that they are in the current
 filesystem. Again full pathnames are required. This can also be specified via
-the \fB$EXTRAFILES\fR environment variable.
+the \fB\f(CB$EXTRAFILES\fB\fR environment variable.
 .ie n .IP "\fB\-r|\-\-raid\fR ""\fI/dev/md1 /dev/md2...\fR""" 4
 .el .IP "\fB\-r|\-\-raid\fR ``\fI/dev/md1 /dev/md2...\fR''" 4
 .IX Item "-r|--raid ""/dev/md1 /dev/md2..."""
 \&\s-1RAID\s0 devices to be started prior to scanning for \s-1LVM2\s0 volume groups. If this
 option is used then then \fBmdadm\fR program must be installed. This can also be
-specified via the \fB$RAID\fR environment variable.
+specified via the \fB\f(CB$RAID\fB\fR environment variable.
 .ie n .IP "\fB\-R|\-\-raidconf\fR ""\fI/path/to/mdadm.conf\fR""" 4
 .el .IP "\fB\-R|\-\-raidconf\fR ``\fI/path/to/mdadm.conf\fR''" 4
 .IX Item "-R|--raidconf ""/path/to/mdadm.conf"""
 Location of a mdadm.conf file to include. If this is not specified, then no
 files are included, and any devices specified with the \fB\-r\fR option above
 must have minor numbers that match their superblock values. This can also be
-specified via the \fB$RAIDCONF\fR environment variable.
+specified via the \fB\f(CB$RAIDCONF\fB\fR environment variable.
 .IP "\fB\-M|\-\-makedev\fR \fIstyle\fR" 4
 .IX Item "-M|--makedev style"
-Set \s-1MAKEDEV\s0 invocation style. The script currently supports 2 styles of
-\&\s-1MAKEDEV\s0 programs \fIdebian\fR and \fIredhat\fR. The default is \fIdebian\fR. Set
-to \fIredhat\fR if using the RedHat/Fedora binary \s-1MAKEDEV\s0 program. Please send
-a bug report to maintainer if your distrib doesn't work with any of the
-current options.
+Set \s-1MAKEDEV\s0 invocation style. The script currently supports 3 styles of
+\&\s-1MAKEDEV\s0 programs \fIdebian\fR, \fIredhat\fR and \fIgentoo\fR. The default is \fIdebian\fR.
+Set to \fIredhat\fR if using the RedHat/Fedora binary \s-1MAKEDEV\s0 program. \fIgentoo\fR
+has the same binary but in /sbin instead of /dev. Please send a bug report to
+maintainer if your distribution doesn't work with any of the current options.
 .SH "ENVIRONMENT VARIABLES"
 .IX Header "ENVIRONMENT VARIABLES"
 Most of the options to this script can be set via environment variables. In
 situations where both are set, then the command-line options take precedence.
-.IP "\fB$LVMCONF\fR" 4
+.ie n .IP "\fB\fB$LVMCONF\fB\fR" 4
+.el .IP "\fB\f(CB$LVMCONF\fB\fR" 4
 .IX Item "$LVMCONF"
 Same as \-c option.
-.IP "\fB$MODULES\fR" 4
+.ie n .IP "\fB\fB$MODULES\fB\fR" 4
+.el .IP "\fB\f(CB$MODULES\fB\fR" 4
 .IX Item "$MODULES"
 Same as \-m option.
-.IP "\fB$EXTRAFILES\fR" 4
+.ie n .IP "\fB\fB$EXTRAFILES\fB\fR" 4
+.el .IP "\fB\f(CB$EXTRAFILES\fB\fR" 4
 .IX Item "$EXTRAFILES"
 Same as \-e option.
-.IP "\fB$RAID\fR" 4
+.ie n .IP "\fB\fB$RAID\fB\fR" 4
+.el .IP "\fB\f(CB$RAID\fB\fR" 4
 .IX Item "$RAID"
 Same as \-r option.
-.IP "\fB$RAIDCONF\fR" 4
+.ie n .IP "\fB\fB$RAIDCONF\fB\fR" 4
+.el .IP "\fB\f(CB$RAIDCONF\fB\fR" 4
 .IX Item "$RAIDCONF"
 Same as \-R option.
-.IP "\fB$MAKEDEV\fR" 4
+.ie n .IP "\fB\fB$MAKEDEV\fB\fR" 4
+.el .IP "\fB\f(CB$MAKEDEV\fB\fR" 4
 .IX Item "$MAKEDEV"
 Same as \-M option.
-.IP "\fB$BASICDEVICES\fR" 4
+.ie n .IP "\fB\fB$BASICDEVICES\fB\fR" 4
+.el .IP "\fB\f(CB$BASICDEVICES\fB\fR" 4
 .IX Item "$BASICDEVICES"
 Overrides the default value of \f(CW$BASICDEVICES\fR in the script (which is \*(L"std consoleonly fd\*(R"). These values are passed to the \fB\s-1MAKEDEV\s0\fR program to create device
 entries in the initrd image.
-.IP "\fB$BLOCKDEVICES\fR" 4
+.ie n .IP "\fB\fB$BLOCKDEVICES\fB\fR" 4
+.el .IP "\fB\f(CB$BLOCKDEVICES\fB\fR" 4
 .IX Item "$BLOCKDEVICES"
 Overrides the default value of \f(CW$BLOCKDEVICES\fR in the script (which is \*(L"md hda hdb hdc hdd sda sdb sdc sdd\*(R"). This value is passed to the \fB\s-1MAKEDEV\s0\fR program to
 create device entries in the initrd image.
-.IP "\fB$BINFILES\fR" 4
+.ie n .IP "\fB\fB$BINFILES\fB\fR" 4
+.el .IP "\fB\f(CB$BINFILES\fB\fR" 4
 .IX Item "$BINFILES"
 Overrides the default value of \f(CW$BINFILES\fR (which is \*(L"/lib/lvm\-200/lvm /bin/bash /bin/busybox /sbin/pivot_root\*(R"). The difference between using this and adding
 a file to the \f(CW$EXTRAFILES\fR list above is that libraries that these depend upon are also included. You can still use \f(CW$EXTRAFILES\fR to achieve the same effect, but
 you must resolve library dependencies youself.
-.IP "\fB$INITRDSIZE\fR" 4
+.ie n .IP "\fB\fB$INITRDSIZE\fB\fR" 4
+.el .IP "\fB\f(CB$INITRDSIZE\fB\fR" 4
 .IX Item "$INITRDSIZE"
 Force a particular size for your initrd image. The default is to total up the size of
 the included files and to add 512K as a buffer.
--- LVM2/scripts/lvm2create_initrd/lvm2create_initrd.pod	2004/06/07 16:20:05	1.1
+++ LVM2/scripts/lvm2create_initrd/lvm2create_initrd.pod	2011/11/12 17:03:54	1.2
@@ -107,11 +107,11 @@
 
 =item B<-M|--makedev> I<style>
 
-Set MAKEDEV invocation style. The script currently supports 2 styles of
-MAKEDEV programs I<debian> and I<redhat>. The default is I<debian>. Set
-to I<redhat> if using the RedHat/Fedora binary MAKEDEV program. Please send
-a bug report to maintainer if your distrib doesn't work with any of the
-current options.
+Set MAKEDEV invocation style. The script currently supports 3 styles of
+MAKEDEV programs I<debian>, I<redhat> and I<gentoo>. The default is I<debian>.
+Set to I<redhat> if using the RedHat/Fedora binary MAKEDEV program. I<gentoo>
+has the same binary but in /sbin instead of /dev. Please send a bug report to
+maintainer if your distribution doesn't work with any of the current options.
 
 =back
 


[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]