load balancing problem

Mohamed HADROUJ (Gmail) hadrouj at gmail.com
Mon May 21 21:44:22 UTC 2007


Hi,
when  entring the following command : ipvsadm -L -c -nI I get this result :

IPVS connection entries
pro expire state       source             virtual            destination
UDP 04:57  UDP         10.11.11.225:32875 10.11.11.230:1812
10.11.11.19:1812

Every request sets the counter to 5:00
Thank you for your help

On 5/21/07, Mohamed HADROUJ (Gmail) <hadrouj at gmail.com> wrote:
>
> I think also it's a persistence issue, because when i tried ipvsadm after
> few minutes, the InActConn is initialized to 0. then the load balancer sends
> the incoming request to the other server. here is an example :
> -I try to send several request : they all get answers but from the same
> server
>    -> RemoteAddress:Port           Forward Weight ActiveConn InActConn
>  UDP  10.11.11.230:radius wrr
>    -> 10.11.11.20:radius           Masq    1      0          0
>    -> 10.11.11.19:radius           Masq    1      0           1
>
> after few minutes :
>    -> RemoteAddress:Port           Forward Weight ActiveConn InActConn
>  UDP  10.11.11.230:radius wrr
>    -> 10.11.11.20:radius           Masq    1      0          0
>    -> 10.11.11.19:radius           Masq    1      0          0
>
> and then all the requests coming to the load balancer are routed to the
> other server :
>    -> RemoteAddress:Port           Forward Weight ActiveConn InActConn
>  UDP  10.11.11.230:radius wrr
>    -> 10.11.11.20:radius           Masq    1      0          1
>    -> 10.11.11.19:radius           Masq    1      0          0
>
> How to fix this behaviour ?
>
> Regards,
>
>
> On 5/21/07, Herta Van den Eynde <herta.vandeneynde at gmail.com> wrote:
> >
> > On 21/05/07, Mohamed HADROUJ (Gmail) <hadrouj at gmail.com> wrote:
> > > Hi All,
> > > I have some load balancing troubles using lvs/piranha, here is the
> > > description :
> > > when i use the ipvsadm command to view the statistics here what i get
> > :
> > > IP Virtual Server version 1.0.8 (size=65536)
> > > Prot LocalAddress:Port Scheduler Flags
> > >   -> RemoteAddress:Port           Forward Weight ActiveConn InActConn
> > > UDP  10.11.11.230:radius wrr
> > >   -> 10.11.11.20:radius           Masq    1      0          0
> > >   -> 10.11.11.19:radius           Masq    1      0          1
> > >
> > > the load balancer keeps forwarding the request to only one server. in
> > > addition of that the counter of the connection established is always
> > equal
> > > to 1.
> > > i've checked also in /var/log/messages, both servers are seen as
> > available.
> > > here is my config file :
> > >
> > > backup_active = 1
> > > backup = 10.11.11.229
> > > backup_private = 10.11.11.121
> > > heartbeat = 1
> > > heartbeat_port = 539
> > >  keepalive = 6
> > > deadtime = 18
> > > network = nat
> > > nat_router = 10.11.11.122 bond0.499:1
> > > debug_level = NONE
> > > virtual gw_radius {
> > >         active = 1
> > >         address = 10.11.11.230 bond0.498:1
> > >         port = 1812
> > >         send_program = "radpwtst -s %h -noacct -noauth -auth_port 1812
> > > -secret mysecret -status"
> > >         expect = "OK"
> > >         use_regex = "0"
> > >         #load_monitor = uptime
> > >         scheduler = wrr
> > >         protocol = udp
> > >         timeout = 6
> > >         reentry = 15
> > >         quiesce_server = 0
> > >         server GW_1 {
> > >                 address = 10.11.11.19
> > >                 active = 1
> > >                 weight = 1
> > >         }
> > >         server GW_2 {
> > >                 address = 10.11.11.20
> > >                 active = 1
> > >                  weight = 1
> > >         }
> > >         server GW_3 {
> > >                 address = 10.11.11.21
> > >                 active = 0
> > >                 weight = 1
> > >         }
> > > }
> > >
> > >
> > >
> > > Thank you for your help
> > > Regards
> >
> > Might be a persistence issue.  Did you try connecting from 2 different
> > nodes/PCs?
> >
> > Kind regards,
> >
> > Herta
> >
> > _______________________________________________
> > Piranha-list mailing list
> > Piranha-list at redhat.com
> > https://www.redhat.com/mailman/listinfo/piranha-list
> >
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://listman.redhat.com/archives/piranha-list/attachments/20070521/c1a12abf/attachment.htm>


More information about the Piranha-list mailing list