[Pki-users] ESC Format / Enroll Error

[Veale, Sean]

No I from further diving down in the documents I belive JC 2.2.1 cards
should work but I've only had the gemalto cards work correctly so far.
On the same note I've only just started using  7.3  and later plan to
use dogtag so I wouldn't take any answer I give as fact :)
 
This is an interesting bug relating to Safenet cards so It might be
useful for you to see if you have something simular
https://bugzilla.redhat.com/show_bug.cgi?id=459538
 
Sean
 


________________________________

From: pki-users-bounces at redhat.com [mailto:pki-users-bounces at redhat.com]
On Behalf Of Zach Casper
Sent: Wednesday, December 24, 2008 10:28 AM
To: pki-users at redhat.com
Subject: RE: [Pki-users] ESC Format / Enroll Error



Thanks Sean. 

 

Has it been verified that JC 2.2.1 cards are incompatible with
Dogtag/CMS 7.3? 

 

zach

 

From: Zach Casper [mailto:zach.casper at envieta.com] 
Sent: Tuesday, December 23, 2008 1:42 PM
To: 'pki-users at redhat.com'
Subject: RE: [Pki-users] ESC Format / Enroll Error

 

Yes - Our cards are JavaCard 2.2.1 and Global Platform 2.1.1 

 

Could that be the problem? 

 

From: pki-users-bounces at redhat.com [mailto:pki-users-bounces at redhat.com]
On Behalf Of Veale, Sean
Sent: Tuesday, December 23, 2008 1:29 PM
To: pki-users at redhat.com
Subject: RE: [Pki-users] ESC Format / Enroll Error

 

Do you know what version of the JavaCard the card supports? I  think you
the card needs to work with JC 2.2.2 to work correctly  (at least in CS
7.3 and probally in Dogtag CS) but confirmation on that would be good.


Sean 

 

________________________________

From: pki-users-bounces at redhat.com [mailto:pki-users-bounces at redhat.com]
On Behalf Of Zach Casper
Sent: Tuesday, December 23, 2008 12:52 PM
To: pki-users at redhat.com
Subject: [Pki-users] ESC Format / Enroll Error

We have an Infineon Smart Card and currently we are unable to
Format/Enroll due to the following ESC Error

 

"Formatting of smart card failed. Error: The Smart Card Server cannot
upgrade the software on your smart card."

 

And Diagnostics show this error:

 

"Attempting to Format Key, ID: ####### - Key Format failure, Error: 19."

 

This card comes up as "Formatted" because we've manually installed a
version of the Dogtag applet prior to using ESC & Dogtag. 

 

Any advice on how we can troubleshoot?

 

--

Zach Casper

Envieta LLC

----------------------------------------

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://listman.redhat.com/archives/pki-users/attachments/20081224/c07cf4c1/attachment.htm>