[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Re: [Rdo-list] Glance does not save properties of images



The exact command here is not important because we primarily discovered this issue through Horizon.
disk_format and (I think) container_format MUST be given when image is created, otherwise Glance API server would not accept them if you omit it.

I tried adding image without disk_format and it is rejected. When I add an image with disk_format specified, image is correctly downloaded and saved but disk_format property is not saved to the database. Same with container_format and is_public. The only property that is saved is the name of the image.

Therefore I think the problem is not related to any sort of client (command) but the server itself, no client is able to omit disk_format property.
I ran Glance Registry in sqlachemy debug mode and pasted SQL queries before - they lack values for these properties.

We started to experience this problem 2 weeks ago after we reinstalled everything again according to Ansible recipe (so in fact all the configuration is the same). If there was a package update in that time it seems like the only reason for anything to change.

Regards,
Daniel Speichert

----- Original Message -----
> From: "Flavio Percoco" <flavio redhat com>
> To: "Daniel Speichert" <daniel speichert pl>
> Cc: "Tzach Shefi" <tshefi redhat com>, rdo-list redhat com
> Sent: Monday, February 3, 2014 2:46:17 AM
> Subject: Re: [Rdo-list] Glance does not save properties of images
> 
> On 03/02/14 05:59 +0100, Daniel Speichert wrote:
> >Yes, I tested that with an admin user. The bigger problem that
> >is_public is that required disk_format and container_format are
> >lost too.
> 
> This sounds like a bigger problem, though.
> 
> What do you mean with `disk_format` and `container_format` are lost?
> for what command? Could you please share the exact command you're
> running?
> 
> Notice that some of these parameters are available at creation time
> but not as part of updates. That said, I recall you said it used to
> work and stopped working after you updated / reinstalled your system.
> 
> Thanks!
> flaper
> 
> >
> >Regards,
> >Daniel Speichert
> >The e
> >----- Original Message -----
> >> From: "Tzach Shefi" <tshefi redhat com>
> >> To: "Daniel Speichert" <daniel speichert pl>
> >> Cc: "Flavio Percoco" <flavio redhat com>, rdo-list redhat com
> >> Sent: Sunday, February 2, 2014 10:43:49 AM
> >> Subject: Re: [Rdo-list] Glance does not save properties of images
> >>
> >> Unfortunately don't have other ideas, I'll try a setup with Rabbit
> >> just to make sure this isn't the cause.
> >>
> >> A long shoot but i'll ask any way the user that set is_public
> >> param,
> >> has admin permissions right?
> >> http://docs.openstack.org/developer/glance/glanceapi.html
> >>
> >> "Use of the is_public parameter is restricted to admin users. For
> >> all
> >> other users it will be ignored."
> >>
> >> Regards,
> >> Tzach
> >>
> >>
> >> ----- Original Message -----
> >> From: "Daniel Speichert" <daniel speichert pl>
> >> To: "Tzach Shefi" <tshefi redhat com>
> >> Cc: "Flavio Percoco" <flavio redhat com>, rdo-list redhat com
> >> Sent: Thursday, January 30, 2014 6:01:26 PM
> >> Subject: Re: [Rdo-list] Glance does not save properties of images
> >>
> >> Yes, Ceph is working well as backend (images are uploaded there
> >> successfully and retrieved as well).
> >> The same problem occurs also when the image is kept locally
> >> (default_store = file).
> >>
> >> We have checked multiple images and the problem is the same.
> >> Interestingly, we had the same setup before (we reinstalled last
> >> week) and it was working fine. That makes me think that something
> >> might be different in the package.
> >>
> >> We use rabbit and it seems to be working fine - ceilometer is
> >> getting
> >> these notifications.
> >>
> >> Do you have any other ideaas? I'm running the latest package
> >> version
> >> form RDO.
> >>
> >> Thanks,
> >> Daniel Speichert
> >>
> >> ----- Original Message -----
> >> > From: "Tzach Shefi" <tshefi redhat com>
> >> > To: "Daniel Speichert" <daniel speichert pl>
> >> > Cc: "Flavio Percoco" <flavio redhat com>, rdo-list redhat com
> >> > Sent: Thursday, January 30, 2014 7:22:58 AM
> >> > Subject: Re: [Rdo-list] Glance does not save properties of
> >> > images
> >> >
> >> > Hello Daniel,
> >> >
> >> > On your posted glance-api.con noticed default_store = rbd,
> >> > assuming
> >> > Glance back end is CEPH (correct?).
> >> >
> >> > Just installed AIO RDO Havana on RHEL 6.5.
> >> > Is_public updated successfully via Horizon\CLI, image shows up
> >> > as
> >> > public on Horizon\image-show.
> >> >
> >> >
> >> > I'm assuming (the obvious..) that you checked this on more than
> >> > just
> >> > that one image, eliminates a single bad image as source of this
> >> > problem.
> >> > BTW what type\source of image was used\checked?
> >> >
> >> > Another difference in setups mine notifier_strategy =QPID your's
> >> > uses
> >> > rabbit.
> >> >
> >> > Regards,
> >> > Tzach
> >> >
> >> > ----- Original Message -----
> >> > From: "Daniel Speichert" <daniel speichert pl>
> >> > To: "Flavio Percoco" <flavio redhat com>
> >> > Cc: rdo-list redhat com
> >> > Sent: Wednesday, January 29, 2014 4:30:56 PM
> >> > Subject: [Rdo-list] Glance does not save properties of images
> >> >
> >> > ----- Original Message -----
> >> > > From: "Flavio Percoco" <flavio redhat com>
> >> > > To: "Daniel Speichert" <daniel speichert pl>
> >> > > Cc: "Lars Kellogg-Stedman" <lars redhat com>,
> >> > > rdo-list redhat com
> >> > > Sent: Tuesday, January 28, 2014 3:37:27 AM
> >> > > Subject: Re: [Rdo-list] Glance does not save properties of
> >> > > images
> >> > >
> >> > >
> >> > > Could you please share the commands your using?
> >> > >
> >> > >     - How are you adding the properties?
> >> > >     - How are you reading the propoerties?
> >> > >
> >> > > You're sharing your registry.log configurations which means
> >> > > you've
> >> > > configured the registry. Could you share how you did that?
> >> > >
> >> > > Thanks,
> >> > > flaper
> >> > >
> >> >
> >> > These are required properties when adding any Glance image
> >> > (disk_format and container_format). I was trying to set
> >> > is_public
> >> > through 'glance image-edit' and Horizon. The change seems to be
> >> > accepted (no error) but on subsequent image-show it's just not
> >> > there.
> >> >
> >> > Registry and API are set up almost by defaults:
> >> > glance-registry.conf: http://pastebin.com/M7Ybjnf9
> >> > glance-api.conf: http://pastebin.com/5sPXr3mG
> >> >
> >> > Regards,
> >> > Daniel Speichert
> >> >
> >> > _______________________________________________
> >> > Rdo-list mailing list
> >> > Rdo-list redhat com
> >> > https://www.redhat.com/mailman/listinfo/rdo-list
> >> >
> >>
> 
> --
> @flaper87
> Flavio Percoco
> 


[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]